Hello, On 15-03-09 21:53:34, chirag garg wrote: > Hello, > > On Mon, Mar 9, 2015 at 9:01 PM, <victorascroft@xxxxxxxxx> wrote: > > > Hello, > > > > On 15-03-09 11:20:55, chirag garg wrote: > > > Hi all, > > > > > > I am new to the linux kernel source code. I want to compile linux source > > > code for imx6 ARM based platform. > > > I want to generate raw binary image (.bin file) and .dtb file. Can any > > one > > > help me in this.? > > > > Which iMX6 platform is this? Depending on the platform, it would be as > > simple as doing make imx_v6_v7_defconfig and then using the correct dtb > > for the platform. Boards like Nitrogen, Sabre or Wandaboard should boot > > easily with the recent kernels. > > > > I am using freescale imx6 quad core saberlite board. Available on the > freescale site > http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q > > Where should be this dtb available according to the board. I am trying to > boot 3.14 linux kernel. The DTS files for all ARM boards are available in the following directory http://lxr.free-electrons.com/source/arch/arm/boot/dts/?v=3.14 http://lxr.free-electrons.com/source/arch/arm/configs/imx_v6_v7_defconfig?v=3.14 imx_v6_v7_defconfig is the config file for imx platform. -Regards, Sanchayan. > > > > Do you have a custom board or one of those easily available development > > platforms? > > > > Board is easily available in the market. > > > > - Regards, > > Sanchayan.. > > > > > > > > Thanks in advance > > > Regards > > > > > > Chirag Garg > > > IIT Madras , Rise Lab > > > > > Regards > Chirag Garg > IIT Madras , Rise Lab > > > > > _______________________________________________ > > > Kernelnewbies mailing list > > > Kernelnewbies@xxxxxxxxxxxxxxxxx > > > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > > > > _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
