On Fri, Aug 8, 2014 at 11:42 AM, selva <selvabe99@xxxxxxxxx> wrote: > Hi All > > I have written a usb module which will be linked if any keyboard > is hot plug. Is it related to the Eudyptula Challenge ?? Looks like it is ... > I follow the step below to make it work > > 1) rmmod usbhid > > 2) insmod hello.ko > > 3) hot plug the keyboard > > when the keyboard is hot plugged my kernel module gets loaded and in > syslog the messages regarding the detection of the keyboard are present. > > My problem is i have to always remove "usbhid", if i donot that > then "usbhid" module is always linked with the keyboard. > > How to make make sure that my module usb_kbd.ko gets linked to the keyboard > with out removing "usbhid" ? > > My code is present in the following link > > https://github.com/selvagit/little_penguin/blob/master/task_05/hello.c > > The syslog is present in the following path > > https://github.com/selvagit/little_penguin/blob/master/task_05/syslog > > I had looked at udev rules, but what i have understood is we can set attributes > for the modules but we can not determine which kernel module should be > loaded for > any device. > > Thanks, > Selvaraj > > _______________________________________________ > Kernelnewbies mailing list > Kernelnewbies@xxxxxxxxxxxxxxxxx > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
