Try echo "7" > /proc/sys/kernel/printk to enable all console log levels. The numbers are corresponding to below: #define KERN_EMERG "<0>" /* system is unusable*/ #define KERN_ALERT "<1>" /* action must be taken immediately*/ #define KERN_CRIT "<2>" /* critical conditions*/ #define KERN_ERR "<3>" /* error conditions*/ #define KERN_WARNING "<4>" /* warning conditions*/ #define KERN_NOTICE "<5>" /* normal but significant condition*/ #define KERN_INFO "<6>" /* informational*/ #define KERN_DEBUG "<7>" /* debug-level messages*/ The default number is 4, which allows console to show messages only at least in KERN_WARNING. That could be why you cannot see log in KERN_INFO level. _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
