On Fri, Apr 05, 2013 at 03:06:37PM +0300, Rami Rosen wrote: > Robert, > You should look for the request_irq() method in the driver. > This method registers an interrupt handler. > For example, you can look in: > http://lxr.free-electrons.com/source/drivers/net/ethernet/intel/e100.c > ... > ... > if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED, > nic->netdev->name, nic->netdev))) > > ... > > This means that e100_intr is registered as an interrupt handler. Is this nic->netdev represent a Ethernet interface ? > > Best, > Rami Rosen > http://ramirose.wix.com/ramirosen > > > On Fri, Apr 5, 2013 at 11:50 AM, Robert Clove <cloverobert@xxxxxxxxx> wrote: > > Hello All, > > > > > > I am new here. > > I want to know the interrupt handler of the ethernet card and where can i > > find the definition of it so as i can clear the flow of packet reception. > > > > Thanks > > Robert > > > > _______________________________________________ > > Kernelnewbies mailing list > > Kernelnewbies@xxxxxxxxxxxxxxxxx > > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > > > > _______________________________________________ > Kernelnewbies mailing list > Kernelnewbies@xxxxxxxxxxxxxxxxx > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
