Re: 8250 UART doesn't populate /proc/iomem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Woody,

On Mon, Dec 10, 2012 at 11:54 AM, Woody Wu <narkewoody@xxxxxxxxx> wrote:
> Hi, list
>
> I found some io memory information is lost from /dev/iomem and want to
> find out why.
>
> I have a 2.6.16 kernel running on a ARM board (Samsung S3C2410). From
> the kernel log, I see 16 8250 serial ports were detected, and each of
> thoese ports has a memory address:
[Snip]

> You see, there is no serial8250 informations.
>
> Can anyone here please tell me how this can happen?  Does it mean the
> serial8250 driver don't populate or register in the /proc/iomem?
>
Can you look at the o/p of /proc/ioports and see if the entry is present here.

Regards,
--Prabhakar Lad

>
> --
> woody
> I can't go back to yesterday - because I was a different person then.
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies@xxxxxxxxxxxxxxxxx
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies


[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux