I have searched using google for information regarding linux driver development and have found a lot, but not the answers to these questions: * Can 2 different kernel drivers access the same device at the same time? * Is every driver known as a kernel module? Basically I need advice on if I can and how to sidestep some of the libata device calls. We do not want to replace the entire libata, just some of it. We have a custom piece of hardware that writes to hard drives. When we use another one of our devices to act as the host the client device runs at full speed. When we run the python GUI with our custom C++ extension using only SATA ports on the motherboard the program runs at full speed. But when we use the python GUI to drive our custom hardware we lose 40% of the speed. We believe the speed loss to be in how libata optimizes how it sends commands/data to the hard drive/device. Thanks in advance, Christopher _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
