On Fri, 2012-09-28 at 12:45 +0530, Rahul Bedarkar wrote: > Can you write command here, how you have applied patches ? > I went into the extracted tarball and tried applying patches one after another like this - patch -p1 < ../<patchname> > Packages (.deb, .rpm and others) meant to build and installed automatically. > > You can build and install it by following command > > $sudo rpm -i <package-name> I am just interested in fully-patched source I want to compile and install it myself without any rpm tools - more clearly - I want to - (1) extract the source tarball available with the rpm package (2) patch this source with all the packages available in the rpm package (3) configure , build and install this source at *custom* location ** I do not want to use any rpm tools for this ** > On Fri, Sep 28, 2012 at 11:51 AM, K Arun Kumar <ziconium03@xxxxxxxxx> wrote: > > I have a rpm for a module which I extracted like - > > rpm2cpio numactl-2.0.7-3.el6.src.rpm | cpio -idmv > > > > then I extracted the source like - > > tar -xzvf numactl-2.0.7-3.tar.gz > > > > then I tried to apply all the patches to available with > > this rpm to the extracted source which results in Hunks and > > rejections. > > > > I want to apply all patches and compile the source and get > > an exe. I am not much aware of the rpm build procedure > > > > I want to do similar thing to kernel source also > > > > Please help me... > > > > Regards, > > Arun > > Thanks, Arun > > > > _______________________________________________ > > Kernelnewbies mailing list > > Kernelnewbies@xxxxxxxxxxxxxxxxx > > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
