Re: Regarding Kernel Project

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 19, 2011 at 09:11:53PM -0500, Pein Junior wrote:
> 
> 
> > What is the USB device and vendor id? 
> 
> Hope this manual help explaining all that.
> 
> http://digicel4gbroadband.com/assets/uploads/WiMAX_USB_Dongle_Modem_G_____AX_225_Quick_Start_Guide.pdf

No, what is the output of 'lsusb' with it plugged in?

> 
> >What have you done to try to make it work?  
> >What kernel version?  What errors did you get?
> 
> my USB ports working fine, with the latest kernel and no errors because it didn't show any new hardware connected.
> And it comes with its own installation when its connected to a windows pc with the ISP name. works on 2.5GHz, they call it WiMax.

You didn't answer all of the questions :(

What does the kernel log show when you plug in the device?  Can you send
the output of 'dmesg'?  Clear out the buffer before you plug it in:
	dmesg -c
then plug in the device, then save the output of the kernel log and send
it in your reply to this message:
	dmesg > kernel_log

thanks,

greg k-h

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies


[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux