On Fri, Jan 7, 2011 at 6:44 AM, Manohar Vanga <manohar.vanga@xxxxxxxxx> wrote: > Hi, > I would suggest using ELDK. I have had an easy time setting it up in the > past. > $ wget ftp://ftp.denx.de/pub/eldk/4.2/arm-linux-x86/iso/arm-2008-11-24.iso > $ mount -o loop arm-2008-11-24.iso /mnt > $ cd /mnt > $ sudo ./install -d /opt/eldk-4.2 > Now add "/opt/eldk-4.2/usr/bin/" to your PATH. My preferred method is to > instead do > $ export CROSS_COMPILE=/opt/eldk-4.2/usr/bin/arm-linux- > and use the $CROSS_COMPILE variable when setting the toolchains in my > Makefiles. Hope this helps :-) Thanks Manohar. Where can I get the list of supported CPU family types for ARM architecture like ARM5, ARM7, ARM926EJ etc. In case of Power Architecture (PPC) there is a list as shown in the below link at ELDK site http://www.denx.de/wiki/view/DULG/ELDKSupportedTargetArchitectures The same is also mentioned in the table at 3.6.A Table of possible values for $CROSS_COMPILE section of the ELDK at http://www.denx.de/wiki/view/DULG/ELDKUsage For us, ARM9 is suitable. Thanks and Regards, Madhavi M. _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
