From edef040c17106bb02431b9399e9b214da8d7a5fd Mon Sep 17 00:00:00 2001
From: Martin Olsson <martin@xxxxxxxxxx>
Date: Sat, 4 Apr 2009 12:29:59 +0200
Subject: [PATCH] Correctly spell the word "parameter" in various source comments.
Signed-off-by: Martin Olsson <martin@xxxxxxxxxx>
---
drivers/atm/lanai.c | 2 +-
drivers/input/joystick/xpad.c | 2 +-
drivers/net/b44.c | 2 +-
drivers/net/smc-mca.c | 2 +-
drivers/net/wireless/orinoco/orinoco.h | 2 +-
drivers/net/wireless/p54/p54spi.c | 2 +-
drivers/scsi/qla1280.c | 2 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 2 +-
drivers/staging/epl/EplInstDef.h | 2 +-
drivers/staging/rt2860/rt28xx.h | 2 +-
drivers/staging/rt2870/rt28xx.h | 2 +-
drivers/usb/core/message.c | 4 ++--
drivers/usb/serial/io_edgeport.c | 2 +-
drivers/usb/serial/ir-usb.c | 2 +-
drivers/video/controlfb.c | 2 +-
fs/debugfs/inode.c | 6 +++---
16 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 8733a2e..df6753e 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -66,7 +66,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
-/* -------------------- TUNABLE PARAMATERS: */
+/* -------------------- TUNABLE PARAMETERS: */
/*
* Maximum number of VCIs per card. Setting it lower could theoretically
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b868b8d..32dfada 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -66,7 +66,7 @@
* - borrowed from the XBOX linux kernel
* - USB id's for commonly used dance pads are present
* - dance pads will map D-PAD to buttons, not axes
- * - pass the module paramater 'dpad_to_buttons' to force
+ * - pass the module parameter 'dpad_to_buttons' to force
* the D-PAD to map to buttons if your pad is not detected
*
* Later changes can be tracked in SCM.
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5c84541..230c13c 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2343,7 +2343,7 @@ static int __init b44_init(void)
unsigned int dma_desc_align_size = dma_get_cache_alignment();
int err;
- /* Setup paramaters for syncing RX/TX DMA descriptors */
+ /* Setup parameters for syncing RX/TX DMA descriptors */
dma_desc_align_mask = ~(dma_desc_align_size - 1);
dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index 8d36d40..568658e 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -240,7 +240,7 @@ static int __init ultramca_probe(struct device *gen_dev)
/* Test the following conditions:
* - If an irq parameter is supplied, compare it
* with the irq of the adapter we found
- * - If a base_addr paramater is given, compare it
+ * - If a base_addr parameter is given, compare it
* with the base_addr of the adapter we found
* - Check that the irq and the base_addr of the
* adapter we found is not already in use by
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 8e5a72c..5df7837 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -115,7 +115,7 @@ struct orinoco_private {
unsigned int broken_disableport:1;
unsigned int broken_monitor:1;
- /* Configuration paramaters */
+ /* Configuration parameters */
u32 iw_mode;
int prefer_port3;
u16 encode_alg, wep_restrict, tx_key;
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 2b222aa..b83a7b4 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -42,7 +42,7 @@ MODULE_ALIAS("stlc45xx");
/*
* gpios should be handled in board files and provided via platform data,
* but because it's currently impossible for p54spi to have a header file
- * in include/linux, let's use module paramaters for now
+ * in include/linux, let's use module parameters for now
*/
static int p54spi_gpio_power = 97;
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index df09820..a1fc449 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -4326,7 +4326,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto error_release_region;
}
- /* load the F/W, read paramaters, and init the H/W */
+ /* load the F/W, read parameters, and init the H/W */
if (qla1280_initialize_adapter(ha)) {
printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
goto error_free_irq;
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 051b0f5..cd18028 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -250,7 +250,7 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
/*memcpy(ha->alias, init_fw_cb->Alias,
min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
- /* Save Command Line Paramater info */
+ /* Save Command Line Parameter info */
ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout);
ha->discovery_wait = ql4xdiscoverywait;
diff --git a/drivers/staging/epl/EplInstDef.h b/drivers/staging/epl/EplInstDef.h
index 89efbf2..1f2fd2e 100644
--- a/drivers/staging/epl/EplInstDef.h
+++ b/drivers/staging/epl/EplInstDef.h
@@ -163,7 +163,7 @@ typedef BYTE tEplInstanceHdl;
//--------------------------------------------------------------------------------------
// macros for declaration within the function header, prototype or local var list
- // Declaration of pointers within function paramater list must defined as void MEM*
+ // Declaration of pointers within function parameter list must defined as void MEM*
// pointer.
#define EPL_MCO_DECL_INSTANCE_PTR void MEM* pInstance
#define EPL_MCO_DECL_INSTANCE_PTR_ void MEM* pInstance,
diff --git a/drivers/staging/rt2860/rt28xx.h b/drivers/staging/rt2860/rt28xx.h
index ff23043..eefc7db 100644
--- a/drivers/staging/rt2860/rt28xx.h
+++ b/drivers/staging/rt2860/rt28xx.h
@@ -1063,7 +1063,7 @@ typedef union _LG_FBK_CFG1_STRUC {
#endif
//=======================================================
-//================ Protection Paramater================================
+//================ Protection Parameter================================
//=======================================================
#define CCK_PROT_CFG 0x1364 //CCK Protection
#define ASIC_SHORTNAV 1
diff --git a/drivers/staging/rt2870/rt28xx.h b/drivers/staging/rt2870/rt28xx.h
index 3927d22..9a9b708 100644
--- a/drivers/staging/rt2870/rt28xx.h
+++ b/drivers/staging/rt2870/rt28xx.h
@@ -1063,7 +1063,7 @@ typedef union _LG_FBK_CFG1_STRUC {
#endif
//=======================================================
-//================ Protection Paramater================================
+//================ Protection Parameter================================
//=======================================================
#define CCK_PROT_CFG 0x1364 //CCK Protection
#define ASIC_SHORTNAV 1
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690..435e43e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -172,7 +172,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg);
* waits for the message to complete, or timeout.
*
* If successful, it returns 0, otherwise a negative error number. The number
- * of actual bytes transferred will be stored in the actual_length paramater.
+ * of actual bytes transferred will be stored in the actual_length parameter.
*
* Don't use this function from within an interrupt context, like a bottom half
* handler. If you need an asynchronous message, or need to send a message
@@ -205,7 +205,7 @@ EXPORT_SYMBOL_GPL(usb_interrupt_msg);
* and waits for the message to complete, or timeout.
*
* If successful, it returns 0, otherwise a negative error number. The number
- * of actual bytes transferred will be stored in the actual_length paramater.
+ * of actual bytes transferred will be stored in the actual_length parameter.
*
* Don't use this function from within an interrupt context, like a bottom half
* handler. If you need an asynchronous message, or need to send a message
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0..a242ef5 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -151,7 +151,7 @@ struct edgeport_serial {
__u8 rxHeader3; /* receive header byte 3 */
__u8 rxPort; /* the port that we are currently receiving data for */
__u8 rxStatusCode; /* the receive status code */
- __u8 rxStatusParam; /* the receive status paramater */
+ __u8 rxStatusParam; /* the receive status parameter */
__s16 rxBytesRemaining; /* the number of port bytes left to read */
struct usb_serial *serial; /* loop back to the owner of this object */
};
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4e2cda9..bf4e2f3 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -47,7 +47,7 @@
*
* 2001_Nov_01 greg kh
* Added support for more IrDA USB devices.
- * Added support for zero packet. Added buffer override paramater, so
+ * Added support for zero packet. Added buffer override parameter, so
* users can transfer larger packets at once if they wish. Both patches
* came from Dag Brattli <dag@xxxxxxxxxxxx>.
*
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 49fcbe8..b8929d3 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -792,7 +792,7 @@ static int read_control_sense(struct fb_info_control *p)
#define CONTROL_PIXCLOCK_MIN 5000 /* ~ 200 MHz dot clock */
/*
- * calculate the clock paramaters to be sent to CUDA according to given
+ * calculate the clock parameters to be sent to CUDA according to given
* pixclock in pico second.
*/
static int calc_clock_params(unsigned long clk, unsigned char *param)
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 81ae9ea..9a6f88b 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -185,7 +185,7 @@ static int debugfs_create_by_name(const char *name, mode_t mode,
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is NULL, then the
* file will be created in the root of the debugfs filesystem.
* @data: a pointer to something that the caller will want to get to later
* on. The inode.i_private pointer will point to this value on
@@ -243,7 +243,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_file);
* @name: a pointer to a string containing the name of the directory to
* create.
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is NULL, then the
* directory will be created in the root of the debugfs filesystem.
*
* This function creates a directory in debugfs with the given name.
@@ -269,7 +269,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir);
* @name: a pointer to a string containing the name of the symbolic link to
* create.
* @parent: a pointer to the parent dentry for this symbolic link. This
- * should be a directory dentry if set. If this paramater is NULL,
+ * should be a directory dentry if set. If this parameter is NULL,
* then the symbolic link will be created in the root of the debugfs
* filesystem.
* @target: a pointer to a string containing the path to the target of the
--
1.6.0.4
Attachment:
0001-Correctly-spell-the-word-parameter-in-various-sour.patch
Description: application/mbox
