But I found the book mostly aim at the 2.4 kernel, can you introduce some good book that base on 2.6? -----邮件原件----- 发件人: Jesper Juhl [mailto:jesper.juhl@xxxxxxxxx] 发送时间: 2006年9月14日 22:01 收件人: Leon.Jiang 抄送: kernelnewbies@xxxxxxxxxxxx 主题: Re: reading 2.4 kernel is a good beginning? On 14/09/06, Leon.Jiang <guanlanjiang@xxxxxxxxx> wrote: > Hi all, > I'm reading the mm code now in linux2.4, I found the codes reads > difficultly, do you think it is a good beginning that read the 2.4 kernel? > If you are just starting out I see no point in starting to learn stuff the 2.4 way, focus on latest 2.6 The mm code is probably one of the most complex areas of the kernel, probably not the best place to start. Get a good book or two and start with those (you can find lots of recommendations in the archives). -- Jesper Juhl <jesper.juhl@xxxxxxxxx> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html -- Kernelnewbies: Help each other learn about the Linux kernel. Archive: http://mail.nl.linux.org/kernelnewbies/ FAQ: http://kernelnewbies.org/faq/
