[patch 09/20] chardev: GPIO for SCx200: dispatch gpio ops via vtable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Now actually call the gpio operations thru the vtable.
Open stores the vtable file->private_data, read,write use it.

Signed-off-by:  Jim Cromie <jim.cromie@xxxxxxxxx>

diffstat patch.vtable-calls:
scx200_gpio.c |   24 ++++++++++++++----------
1 files changed, 14 insertions(+), 10 deletions(-)

---

diff -ruNp -X dontdiff -X exclude-diffs ab-8/drivers/char/scx200_gpio.c ab-9/drivers/char/scx200_gpio.c
--- ab-8/drivers/char/scx200_gpio.c	2006-06-02 13:37:14.000000000 -0600
+++ ab-9/drivers/char/scx200_gpio.c	2006-06-02 13:37:31.000000000 -0600
@@ -53,6 +53,7 @@ static ssize_t scx200_gpio_write(struct size_t len, loff_t * ppos)
{
	unsigned m = iminor(file->f_dentry->d_inode);
+	struct nsc_gpio_ops *amp = file->private_data;
	size_t i;
	int err = 0;

@@ -62,39 +63,39 @@ static ssize_t scx200_gpio_write(struct return -EFAULT;
		switch (c) {
		case '0':
-			scx200_gpio_set(m, 0);
+			amp->gpio_set(m, 0);
			break;
		case '1':
-			scx200_gpio_set(m, 1);
+			amp->gpio_set(m, 1);
			break;
		case 'O':
			printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
-			scx200_gpio_configure(m, ~1, 1);
+			amp->gpio_config(m, ~1, 1);
			break;
		case 'o':
			printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
-			scx200_gpio_configure(m, ~1, 0);
+			amp->gpio_config(m, ~1, 0);
			break;
		case 'T':
			printk(KERN_INFO NAME ": GPIO%d output is push pull\n", m);
-			scx200_gpio_configure(m, ~2, 2);
+			amp->gpio_config(m, ~2, 2);
			break;
		case 't':
			printk(KERN_INFO NAME ": GPIO%d output is open drain\n", m);
-			scx200_gpio_configure(m, ~2, 0);
+			amp->gpio_config(m, ~2, 0);
			break;
		case 'P':
			printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
-			scx200_gpio_configure(m, ~4, 4);
+			amp->gpio_config(m, ~4, 4);
			break;
		case 'p':
			printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
-			scx200_gpio_configure(m, ~4, 0);
+			amp->gpio_config(m, ~4, 0);
			break;

		case 'v':
			/* View Current pin settings */
-			scx200_gpio_dump(m);
+			amp->gpio_dump(m);
			break;
		case '\n':
			/* end of settings string, do nothing */
@@ -117,8 +118,9 @@ static ssize_t scx200_gpio_read(struct f
{
	unsigned m = iminor(file->f_dentry->d_inode);
	int value;
+	struct nsc_gpio_ops *amp = file->private_data;

-	value = scx200_gpio_get(m);
+	value = amp->gpio_get(m);
	if (put_user(value ? '1' : '0', buf))
		return -EFAULT;

@@ -128,6 +130,8 @@ static ssize_t scx200_gpio_read(struct f
static int scx200_gpio_open(struct inode *inode, struct file *file)
{
	unsigned m = iminor(inode);
+	file->private_data = &scx200_access;
+
	if (m > 63)
		return -EINVAL;
	return nonseekable_open(inode, file);



--
Kernelnewbies: Help each other learn about the Linux kernel.
Archive:       http://mail.nl.linux.org/kernelnewbies/
FAQ:           http://kernelnewbies.org/faq/


[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux