On Thu, 21 Oct 2004, Hans-Peter Jansen wrote: > On Thursday 21 October 2004 20:43, Bartlomiej Zolnierkiewicz wrote: > > On Wed, 20 Oct 2004 16:23:21 +0200, Hans-Peter Jansen > <hpj@xxxxxxxxx> wrote: > > > Hmm, I'm running 3 TX2/100 (even with different revisions) > > > without big problems here: > > > > > > 00:09.0 Unknown mass storage controller: Promise Technology, Inc. > > > 20268 (rev 02) 00:0a.0 Unknown mass storage controller: Promise > > > Technology, Inc. 20268 (rev 02) 00:0b.0 Unknown mass storage > > > controller: Promise Technology, Inc. 20268 (rev 01) > > > > lspci -xxx ? > > With pleasure. Let me know, if I can provide anything else useful. > BTW, Bart, I suspect James' problem is, that his system is running in > pic mode, while mine is in apic mode. i dont actually think that this is a problem i was reading an artical from a website (cant find address now) which was stating that the promise card's fireware on the PDC20269 was limited by the firmware to 2 cards and the 3rd did not work in other cases. The author had setup various other systems in the same way using other promise hardware but slightly different cards. I have replaced the 3rd promise card with a highpoint card and everything is working fine and has been for the last 36 hours. James -- -------------------------- Mobile: +44 07779080838 http://www.stev.org 10:50pm up 1 day, 9:16, 3 users, load average: 0.07, 0.02, 0.00 -- Kernelnewbies: Help each other learn about the Linux kernel. Archive: http://mail.nl.linux.org/kernelnewbies/ FAQ: http://kernelnewbies.org/faq/
