Hello all,
I added 3c905C-TX-M PCI ethernet card to the target and when I say insmod I
got the following error.
init-2.05# insmod 3c59x.o
3c59x.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
inva
lid IO or IRQ parameters
And the when I check the /proc/pci contents the device was existed. (Bus1,
Device 13).
init-2.05# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 1189:283c (rev 3).
Master Capable. Latency=16.
Non-prefetchable 32 bit memory at 0x0 [0x3fffffff].
Bus 0, device 2, function 0:
Class 0200: PCI device 1022:2000 (rev 67).
IRQ 35.
Master Capable. Latency=64. Min Gnt=24.Max Lat=24.
I/O at 0x1000 [0x101f].
Non-prefetchable 32 bit memory at 0x10100000 [0x1010001f].
Bus 0, device 3, function 0:
Class 0604: PCI device 1011:0022 (rev 6).
Bus 1, device 13, function 0:
Class 0200: PCI device 10b7:9200 (rev 48).
IRQ 35.
Master Capable. No bursts. Min Gnt=10.Max Lat=10.
I/O at 0x10000 [0x1007f].
Non-prefetchable 32 bit memory at 0x10000000 [0x1000007f].
init-2.05#
I could not understand what could be the problem.
Please let me know anything that I am doing wrong.
Thanks in advance
Ramprasad
--
Kernelnewbies: Help each other learn about the Linux kernel.
Archive: http://mail.nl.linux.org/kernelnewbies/
FAQ: http://kernelnewbies.org/faq/
