I am trying to understand where can I use flowtable on a load balancer. Also if and how it will work with PBR. I have created a nftables load balancer lab at: . https://github.com/elico/mwan-nft-lb-example . https://github.com/elico/mwan-nft-lb-example/blob/main/run-lab.sh I know that flow tables cannot work with PBR but not sure on what degree. Also maybe something is needed possible.. I will try to describe the lab: 1 client ether0: 192.168.125.100/24 gw 192.168.125.254 1 Lan GW ether0: 192.168.125.254/24 ether5-15: 192.168.205-215.254/24 (10 ~ wan interfaces with ip addresses) 15 WAN Routers ether0: 192.168.101.5-15/24( a single ip per WAN Router) (SNAT ie MASQUERADE) ether1: 192.168.205-215.254/24( a single ip per WAN Router) 1 Edge_R_Web_service ether0: 192.168.89.99/24 (SNAT ie MASQUERADE) GW 192.168.89.254 (MASQUEARDE to the Real WORLD) ether1: 192.168.101.254/24 This lab tests the LB of the LAN GW towards the WAN Routers and verifies the result via a HTTP request. The client sends a http request towards 192.168.101.254 and then receives the ip address of the WAN Router at the 192.168.101.0/24 net. If it's possible to use flowtable on any of the Routers on this network I would like to make sure I understood right. Thanks, Eliezer ---- Eliezer Croitoru Tech Support Mobile: +972-5-28704261 Email: ngtech1ltd@xxxxxxxxx ---- Eliezer Croitoru Tech Support Mobile: +972-5-28704261 Email: ngtech1ltd@xxxxxxxxx