On Mon, Dec 17, 2012 at 08:33:58PM -0800, Kevin Cernekee wrote: > Most SIP devices use a source port of 5060/udp on SIP requests, so the > response automatically comes back to port 5060: > > phone_ip:5060 -> proxy_ip:5060 REGISTER > proxy_ip:5060 -> phone_ip:5060 100 Trying > > The newer Cisco IP phones, however, use a randomly chosen high source > port for the SIP request but expect the response on port 5060: > > phone_ip:49173 -> proxy_ip:5060 REGISTER > proxy_ip:5060 -> phone_ip:5060 100 Trying > > Standard Linux NAT, with or without nf_nat_sip, will send the reply back > to port 49173, not 5060: > > phone_ip:49173 -> proxy_ip:5060 REGISTER > proxy_ip:5060 -> phone_ip:49173 100 Trying > > But the phone is not listening on 49173, so it will never see the reply. > > This patch modifies nf_*_sip to work around this quirk by extracting > the SIP response port from the Via: header, iff the source IP in the > packet header matches the source IP in the SIP request. Applied, thanks Kevin. -- To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
