SIP 5060 traffic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I have a LAN NET  and a DMZ NET.  I have a SIP phone within the LAN
trying to connect to a proxy at an external site, say A.

Can someone point out if I'm missing anything?  

Rules:

$IPT -A FORWARD -o $INET_ETH -p udp --dport 5060 -j ACCEPT
$IPT -t nat -A POSTROUTING -o $INET_ETH -p udp --dport 5060 \
             -j SNAT --to-source $INET_IP

When I do a tcpdump, I can see traffic from the LAN go through my
bastion Firewall that routes to my external-facing firewall.
But there is no traffic coming back from the outside.

17:05:19.831000 IP (tos 0x0, ttl 127, id 1595, offset 0, flags [none], proto:
UDP (17), length: 367) LAN_IP.5060 > A_SITE.5060: SIP, length: 339

There's no corresponding entry that has traffic going the other way: 
i.e.:

IP (tos 0x0, ttl 127, id 1595, offset 0, flags [none], proto: UDP (17),
length: 367) A_SITE.5060 > LAN_IP.5060: SIP, length: 339

I'm a bit confused.  Any clarifications appreciated.

Thanks

Ed
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux