Re: [Bridge] ebtables PREROUTING -drop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





--On 4 August 2010 14:33:10 +0200 Jan Engelhardt <jengelh@xxxxxxxxxx> wrote:

Did you read http://ebtables.sourceforge.net/br_fw_ia/br_fw_ia.html and
http://ebtables.sourceforge.net/br_fw_ia/PacketFlow.png ?

A useful improvement to those would be documenting where libpcap
(which does both input and, less well known, output) samples/injects
packets. I /think/ sampling is right on the left and injection right
on the right.

pcap grabbing and injection is completely outside any of the graphs
currently floating around.

If by 'outside' you mean 'to the extreme left or extreme right'
that was my conclusion. But the absence of any documentation means
this makes debugging with tcpdump (for instance) harder
because you don't know where you are sampling.

I'm not 100% sure it is completely outside though. For instance,
if you do tcdump on a bridge device (as opposed to the corresponding
physical participant interface), isn't that after ingress ebtales
processing, but before egress? IE is in the graph somewhere.

--
Alex Bligh
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux