Re: IP Forwarding works on local port but not a remote port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Are you using /16 netmask?
No, I just took the 10.117 part off the ip's to shorten the message.
>
>
> None of them got SNATed. Why? Should they go out through eth0? Try to
> remove "-o eth0".
Removed it and no change
>
> Also do you have ip.forwarding enabled (sysctl -a | grep forward")?
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.forwarding = 1
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.forwarding = 1

>
> Can you reach 10.117.1.205:1521 from sethra (telnet 10.117.1.205 1521)?
>
Negative, but the command from sethra fails immediately with nothing
showing in the logs

There has also been mention of a FORWARD chain being necessary.  I
haven't done anything outside of the commands listed in this thread.
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux