Hi, need help with shaping in complex setup. Is it possible to queue same packet into two IMQ interfaces sequentially, so that the packet got queued into imq1, then into imq2? I know it's possible to do so by putting it in imq1 in PREROUTING and in imq2 in POSTROUTING, but one IMQ device in PREROUTING (imq0) and one IMQ device in POSTROUTING (imq1) already occupied for another task. I have complex HTB channel division between 7 interfaces/vlans/bridge made on top of IMQ for both PREROUTING and POSTROUTING. Problem is that I also need to rate limit some traffic independently of the rest shaping. In previous setup there were 2 routers, one did HTB channel division and other did rate limits by "tc filter police rate", now I'm left with only one router. I was mistakenly(?) thought that I can chain IMQs so that same traffic first come to say imq1 then imq2. Are there other ways to combine HTB channel division with independant rate limits? I can't do rate limit in existing PREROUTING/POSTROUTING (imq0/imq1) classes, because those contain trees with classes for all directions for incomming/outgoing. So I would have to insert several "tc filter police rate" for each direction putting underlimit traffic to apropriate class and drop overlimit, but this way I'll get say 256kbit/s to Internet + 256kbit/s to Servers + 256kbit/s to Router itself which is not what really needed. There should be one limit to all directions. I also can't do that in normal way at egress in each interface b/c each rate limit should be across multiple interfaces. Is there any other solution for this task using only one linux router? -- Покотиленко Костик <casper@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
