On 10/23/2008 11:14 PM, Joey wrote:
Hey Grant,
*wave*
Here is what I can tell you.
I run iptables -F which is supposed to clear everything.
*nod*
I then load my config and what you see as a result of that load is what you
see in the iptables-save result.
Ok... Do the pages you linked to before reflect what is below, or is
what you have below a small subset of the over all config?
I have a script that builds the iptables-save.cfg file from a file
containing IP numbers only.
I gathered that is what you were doing. I don't see any thing wrong
with doing that either.
When I build the script you can see that certain things happen based on the
fact that I am reading in values and building each "chain" in order, so you
won't see all the defining of the chains at the top like the iptables-save
version.
*nod*
Now I could be missing something somewhere in my declarations, but the code
is working in general. I see IP's being blocked, as you can see I do a lot
of logging to insure I know what's going on.
Yep.
The chains for fail2ban are built and managed by that app so I don't mess
with them.
Ah.
I completely rebooted the box prior to doing the below. Normally I never
rebooted the box, but new kernel came out so I figured we will start from a
clean slate.
I tend to do the same.
I did a reduced list test:
----------------------------------------------------
My quick file which is created by my app:
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:SMTP_TRAFFIC - [0:0]
-A INPUT -p tcp --dport 25 -m state --state NEW -j SMTP_TRAFFIC
:LOG_ASIAN - [0:0]
:CIDR-ASIAN - [0:0]
-A SMTP_TRAFFIC -j CIDR-ASIAN
-A LOG_ASIAN -j LOG --log-prefix "SPAM-BLOCK-CIDR-ASIAN"
-A LOG_ASIAN -j DROP
-A CIDR-ASIAN -s 58.14.0.0/15 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.16.0.0/13 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.24.0.0/15 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.29.0.0/16 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.30.0.0/15 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.32.0.0/11 -j LOG_ASIAN
COMMIT
----------------------------------------------------
I executed iptables-restore < above-file
Is the above file your current config, or just a small portion of your
config that you created for this test? I don't see hardly any thing
compared to your previous iptables-save file.
----------------------------------------------------
Executing iptables --list results in:
Chain INPUT (policy ACCEPT)
target prot opt source destination
SMTP_TRAFFIC tcp -- anywhere anywhere tcp dpt:smtp
state NEW
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain CIDR-ASIAN (1 references)
target prot opt source destination
LOG_ASIAN all -- 58.14.0.0/15 anywhere
LOG_ASIAN all -- 58.16.0.0/13 anywhere
LOG_ASIAN all -- 58.24.0.0/15 anywhere
LOG_ASIAN all -- 58.29.0.0/16 anywhere
LOG_ASIAN all -- 58.30.0.0/15 anywhere
LOG_ASIAN all -- 58.32.0.0/11 anywhere
Chain LOG_ASIAN (6 references)
target prot opt source destination
LOG all -- anywhere anywhere LOG level
warning prefix `SPAM-BLOCK-CIDR-ASIAN'
DROP all -- anywhere anywhere
Chain SMTP_TRAFFIC (1 references)
target prot opt source destination
CIDR-ASIAN all -- anywhere anywhere
----------------------------------------------------
This is what I would expect to see based on your iptables-save file above.
Executing iptables-save resulted in:
# Generated by iptables-save v1.2.11 on Fri Oct 24 00:08:34 2008
*filter
:INPUT ACCEPT [1091:155172]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [1287:150175]
:CIDR-ASIAN - [0:0]
:LOG_ASIAN - [0:0]
:SMTP_TRAFFIC - [0:0]
-A INPUT -p tcp -m tcp --dport 25 -m state --state NEW -j SMTP_TRAFFIC
-A CIDR-ASIAN -s 58.14.0.0/255.254.0.0 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.16.0.0/255.248.0.0 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.24.0.0/255.254.0.0 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.29.0.0/255.255.0.0 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.30.0.0/255.254.0.0 -j LOG_ASIAN
-A CIDR-ASIAN -s 58.32.0.0/255.224.0.0 -j LOG_ASIAN
-A LOG_ASIAN -j LOG --log-prefix "SPAM-BLOCK-CIDR-ASIAN"
-A LOG_ASIAN -j DROP
-A SMTP_TRAFFIC -j CIDR-ASIAN
COMMIT
# Completed on Fri Oct 24 00:08:34 2008
----------------------------------------------------
Again, this is what I would expect to see based on your iptables-save
file above.
Let me know what you see or think...
Please try re-applying your iptables-save.cfg file from your previous
post and let us know if your firewall is still blocking the 71.74.56.125 IP.
Thanks!!!!!
You are welcome.
Grant. . . .
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html