If the Vendor's (iptables) firwall is ARPing for your systems then their
firwall thinks that the destination system is on their local LAN. Check to
make sure that they have correct routes to your network (assuming that you
rnetwork is a different subnet than their LAN. If the LANs do indeed have
different subnets as in the vendor is 10.0.0.0/8 and yours is 10.1.2.0/24
they need to make sure that they know to get to your subnet via your PIX
firewall, it's a simple routing table entry.
Any thing beyound this I (personally as I can't follow everything with out
much info) would need to see more details about what subnets were where,
what firwalls were doing what and what your PIX is doing connecting to the
vendor's firewall. Is this a VPN connection passing over the internet? The
more info the better. In fact overwhel me with info and let me sort it out,
that way I should have most of / everything that I need to help. (Well
that's the idea any way.)
Grant. . . .
> I am seeing a most curious problem, and hope that someone here will
> recognize something obvious and smack me in the head with it before we
> have to delve into the inner depths of every relevant config...
>
> Here's a quick-n-dirty text diagram of the current network layout:
>
> { V }--[ r ]--[ fw ]--[PIX]--{ L }
> x
> [ s ]
> Key:
> V = Vendor's network
> r = Vendor's router
> fw = Vendor's (iptables) firewall
> s = Vendor's (samba) server
> PIX = Our Cisco PIX Firewall
> L = Our LAN
>
> Everything on the *left* side of the PIX is in a DMZ (from the LAN-
> side perspective.) The 'fw' machine is configured to forward netbios
> connections to 's', the samba server. Clients on our LAN use the IP
> address of 'fw' to map drives. There did not used to be a 'fw' machine
> in this picture at all, but when the vendor added it they simply used
> the DMZ address previously owned by 's' and gave 's' a new one on a
> private subnet. The 's' machine is directly connected to 'fw' with a
> crossover cable.
>
> Here's where things get dodgy: when a client on our Lan tries to map a
> drive, the SYN packet gets to 'fw' as expected, and gets MASQ'd along to
> 's'. The response come back, lands at 'fw' - at which point 'fw' starts
> ARPing for a destination MAC address as if the LAN client were local to
> the DMZ.
>
> Does anyone eyeballing this have an 'Aha!' for me? Or do we need to
> see iptables, routes, PIX rules, and packet captures to proceed? Am I
> correct in thinking that this is a basic routing issue and not an
> iptables issue, that ARP is inappropriate here, and that the vendor's
> work-around (static ARP entries on 'fw') is an abomination?
>
> Any insight would be greatly appreciated... Thanks in advance! :)
