On Sunday 13 February 2005 15:39, Brent Clark wrote: > ====================================================================================== > > echo 1 > /proc/sys/net/ipv4/ip_dynaddr #This may help if you have a > dynamic IP address \(e.g. slip, ppp, dhcp\) > echo 1 > /proc/sys/net/ipv4/conf/all/log_martians #Enable logging > for malformed Ip Address > echo 1 > /proc/sys/net/ipv4/ip_forward > echo 1 > /proc/sys/net/ipv4/conf/all/proxy_arp > echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter > echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts > echo 0 > /proc/sys/net/ipv4/conf/all/accept_source_route > echo 0 > /proc/sys/net/ipv4/conf/all/accept_redirects > > ===================================================================================== The following article may be useful: http://www.securityfocus.com/infocus/1711 -- Mikhail
