Re: Routing problem with 3 interfaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looking at those 2 providers (once sisters), I would wonder to have
your setup working. Also i can see you use nat in PREROUTING, wich is
wrong, you should do SNAT in POSTROUTING -o $isp2 , I'm also not that
sure your 'ip rule's are completly correct, you never know how you end
up in a route loop.


On Tue, 25 Jan 2005 03:03:51 -0800 (PST), Funieru Bogdan
<fbsoft01@xxxxxxxxx> wrote:
> Hello all
> I'm having a little problem routing my 2 internet
> connections to my LAN, here is the schem of my network
> 
>                   ISP1                            ISP2
>                    |                               |
>         IP:193.230.183.11               IP:193.19.192.108
>         GTW:193.230.183.4               GTW 193.19.192.65
>                    |                               |
>                    |                               |
>                 SERVER1 <---routable ip---------SERVER2 -> eth0 to
> ISP2
> to server2 via  eth1<-                                  -> eth1 to other comp ip add
> 83.175.128.96
> ip 83.175.128.123                                       -> eth2 to server1 ip
> 83.175.128.123
> to LAN via      eth2<-
> ip 192.168.1.1
> to ISP1         eth0<-
> 
> i hope that the schematic is a little bit
> understandful now the big problem is that i wan't to
> give acces to my LAN on both connections, but on
> different ip's
> Now i want everything that comes from ip 141.85.0.0/16
> to go to server2 and everything else to go through
> server1
> 
> i've done a little bit of researching but all i ended
> up was trash, because when i try to link to the ip
> 141.85.0.0/16 i get through tracert that the packets
> go ok until they stop at the gateway of server2 , ip
> 193.19.192.65,and from here it freazes,it doesn't go
> anywhere at all.
> 
> i have the following rule add
> route add default gw 193.230.183.4
> #i tryed with
> ip route add default via 83.175.128.123 table
> net_retea1
> ip rule add dev eth1 table net_retea1
> ip rule add from 192.168.1.2 to 141.85.0.0/16 table
> net_retea1
> ip rule add 83.175.128.124 table net_retea1
> iptable -t nat -A PREROUTING -i eth1 -s 192.168.1.2 -d
> 141.85.0.0/16 --to 83.1751.28.124
> 
> and i've marked the pachets as well thought it'll work
> , but it didn't ... how do i make it work ?
> thx in advance
> nothing but the best Bogdan
> 
> =====
> -------------------
> Funieru Bogdan
> Admin MosilorNET
> 
> Contact Info:
> Mob:
> 0742158956
> 0726592752
> 0744301506(very rare)
> -------------------
> 
> 
> __________________________________
> Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
> http://promotions.yahoo.com/new_mail
> 
> 


-- 
Bla bla


[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux