make user squid is configured for transparent proxying "interception"
* httpd_accel_host virtual
* httpd_accel_port 80
* httpd_accel_with_proxy on
* httpd_accel_uses_host_header on
regards
On Wed, 5 Jan 2005 20:52:06 +0530, Navneet <navneetkc@xxxxxxxxx> wrote:
> Hi,
>
> Now, pease check this out :-
> I was trying to run squid in transparent mode(Transparent Proxying) ?
>
> System details:
> RedHat Linux 9
> eth0 133.147.171.169/8 [Internal NIC]
> eth1 172.21.133/14 [External NIC]
>
> All http request get REDIRECTED to squid at eth0(Internal).It should work
> as Gateway by means of eth1(External).
>
> i've done this:
> 1.Enabled IP forwarding
> #echo "1" >/proc/sys/net/ipv4/ip_forward
> 2.iptables (Netfilter) PORT REDIRECTION:
> #iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j
> REDIRECT --to-port 3128
>
> Port not getting REDIRECTED as per above iptables rule?.
> Why it so?
>
> Thanks
>
> Regards,
> Navneet
>
> "Learning Linux"
>
> Reference:
> http://www.ibiblio.org/pub/Linux/docs/HOWTO/TransparentProxy
> http://iptables-tutorial.frozentux.net/iptables-tutorial.html
> http://www.iptablesrocks.org/
>
>
--
(after bouncing head on desk for days trying to get mine working, I'll make
your life a little easier)
