These are the default values. It still does'nt work. Can any one kindly go through my script and tell me the mistake I am making. This is a Linux PC with receive only pentanet card. Thanks for all the help. IPTABLES="/sbin/iptables" IP1=212.15.150.9 # # $IPTABLES -F $IPTABLES -F INPUT $IPTABLES -F OUTPUT $IPTABLES -F FORWARD $IPTABLES -F -t mangle $IPTABLES -F -t nat $IPTABLES -X $IPTABLES -P INPUT DROP $IPTABLES -P OUTPUT ACCEPT $IPTABLES -P FORWARD DROP # # # silent - Just dop the packet # tcpflags - Log packets with bad flags, most likely an attack # firewalled - Log packets that that we refuse, possibly from an attack # $IPTABLES -N silent $IPTABLES -A silent -j DROP $IPTABLES -N tcpflags $IPTABLES -A tcpflags -m limit --limit 15/minute -j LOG --log-prefix TCPflags: $IPTABLES -A tcpflags -j DROP $IPTABLES -N firewalled $IPTABLES -A firewalled -m limit --limit 15/minute -j LOG --log-prefix Firewalled: $IPTABLES -A firewalled -j DROP # # These are all TCP flag combinations that should never, ever, occur in the # wild. All of these are illegal combinations that are used to attack a box # in various ways. # $IPTABLES -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT # the above line will allow traffic from loopback interface $IPTABLES -A INPUT -p tcp --tcp-flags ALL FIN,URG,PSH -j tcpflags $IPTABLES -A INPUT -p tcp --tcp-flags ALL ALL -j tcpflags $IPTABLES -A INPUT -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j tcpflags $IPTABLES -A INPUT -p tcp --tcp-flags ALL NONE -j tcpflags $IPTABLES -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j tcpflags $IPTABLES -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j tcpflags # # Allow selected ICMP types and drop the rest. # $IPTABLES -A INPUT -p icmp --icmp-type 0 -j ACCEPT $IPTABLES -A INPUT -p icmp --icmp-type 3 -j ACCEPT $IPTABLES -A INPUT -p icmp --icmp-type 11 -j ACCEPT $IPTABLES -A INPUT -p icmp --icmp-type 8 -m limit --limit 1/second -j ACCEPT $IPTABLES -A INPUT -p icmp -j firewalled # # The loopback interface is inheritly trustworthy. Don't disable it or # a number of things will break. # $IPTABLES -A INPUT -i lo -j ACCEPT # # Now allow Internet hosts access to those services we provide. Note that # enabling inbound FTP 20 & 21 tcp will also require allowing ports # 1024-65534/tcp. Which in itself is good enough reason not to allow FTP # connections and to only allow ssh/scp/sftp. # # Allow ssh frpm anywhere to this server # $IPTABLES -A INPUT -p tcp -s 0/0 --dport 22 -j ACCEPT # # HTTP access from anywhere # $IPTABLES -A INPUT -p tcp -s 0/0 --dport 80 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 0/0 --dport 443 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 0/0 --dport 25 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 0/0 --dport 53 -j ACCEPT $IPTABLES -A INPUT -p udp -s 0/0 --dport 53 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 0/0 --dport 123 -j ACCEPT $IPTABLES -A INPUT -p udp -s 0/0 --dport 123 -j ACCEPT # # $IPTABLES -A FORWARD -i pentanet0 -p tcp --dport 80 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p tcp --dport 443 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p tcp --dport 25 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p tcp --dport 53 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p udp --dport 53 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p udp --dport 123 -j ACCEPT $IPTABLES -A FORWARD -i pentanet0 -p tcp --dport 123 -j ACCEPT # # If there are trusted nodes you can allow then access to everything with # something like. Be sure to set IP at the top of this script if you enable one # of these. # #$IPTABLES -A INPUT -s 10.0.0.0/24 -d $IP1 -j ACCEPT # # Allow packets that are part of an established connection to pass # through the firewall. This is required for normal Internet activity # by inside clients. # $IPTABLES -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # # Anything not already matched gets firewalled and logged. # $IPTABLES -A INPUT -j firewalled >Actually assuming that the satellite card is pentanet0 you want >echo 0 > /proc/sys/net/ipv4/conf/all/rp_filters >echo 1 > /proc/sys/net/ipv4/conf/pentanet0/rp_filters >To only turn off spoofing protection on the one interface.
