Where are the RELATED,ESTABLISHED state packets ? Also, define "does not work" look here: alex@server:~$ telnet 82.186.92.91 22 Trying 82.186.92.91... Connected to 82.186.92.91. Escape character is '^]'. SSH-1.99-OpenSSH_3.5p1 same for .93 Are you sure the services you want to connect to bind on those ips, or 0.0.0.0 ? Check this with netstat -tln |grep <desired port> Best regards On Mon, 19 Jul 2004 20:55:00 +0200, Batstru <batstru@xxxxxxxx> wrote: > Hi all! > I wrote days ago: I have a problem with virutal interface and iptables: > my pc has 2 network interface, one with a private network address and the > other one with > public network addresses: > eth0 --> 192.168.1.254 / 255.255.255.0 > eth1 --> 82.186.92.90 / 255.255.255.248 > eth1:1 --> 82.186.92.91 / 255.255.255.248 > eth1:2 --> 82.186.92.92 / 255.255.255.248 > eth1:3 --> 82.186.92.93 / 255.255.255.248 > eth1:4 --> 82.186.92.93 / 255.255.255.248 > I have configured network with ifconfig and route > iptables has this filter rules: > *filter > :FORWARD DROP [0:0] > :INPUT DROP [0:0] > :OUTPUT DROP [0:0] > -A INPUT -i lo -j ACCEPT > -A INPUT -m state -i eth0 --state NEW -j ACCEPT > -A INPUT -s 192.168.1.0 -i eth0 -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 22 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 80 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 143 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 10000 > --state NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 25 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.90 --dport 110 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 20 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 21 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 22 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1:1 -d 82.186.92.91 --dport 25 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 53 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 80 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 110 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 143 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.91 --dport 443 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 20 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 21 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 22 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 25 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 80 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 110 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 143 --state > NEW -j ACCEPT > -A INPUT -p tcp -m tcp -m state -i eth1 -d 82.186.92.93 --dport 8888 --state > NEW -j ACCEPT > as you can see I've tried changing configuration but anything changes: it is > reported just a > warning but the rule is not applied. > -A INPUT -p tcp -m tcp -m state -i eth1:1 -d 82.186.92.91 --dport 25 --state > NEW -j ACCEPT > My pc is running Fedora core 2 and the kernel is 2.6.6 and I've just > upgraded iptables to last > release. > > The problem is that I can't access to services running at virtual > interfaces. > I tried to solve the problem as suggested me: I've seen that using alias is > deprecated so I > tried using iproute: I set up with > ip addr add 82.186.92.90/24 brd 82.186.92.95 dev eth1 label eth1:0 > ip addr add 82.186.92.91/24 brd 82.186.92.95 dev eth1 label eth1:1 > ip addr add 82.186.92.92/24 brd 82.186.92.95 dev eth1 label eth1:2 > ip addr add 82.186.92.93/24 brd 82.186.92.95 dev eth1 label eth1:3 > ip addr add 82.186.92.94/24 brd 82.186.92.95 dev eth1 label eth1:4 > but after service iptables restart anything changes, alias's rules doesn't > be applied and no > errors is reported. > I think I'm doing something wrong with iproute but I don't know what: shoud > I give any command > to enable iproute? > > My problem is quite strange, I've never seen such.... > > tnks > marco > -- > Email.it, the professional e-mail, gratis per te: http://www.email.it/f > > Sponsor: > Conto Arancio. Zero spese, stessa banca, più interessi. > Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=657&d=20040719 > >
