[First post didn't seem t show up.] I'm forwarding this message that I posted the the LARTC mailing list here as well since I'm pressed for time and am looking for as much feedback to get this working. The message below is a clarification of an early e-mail that I sent. The original has some more information (e.g., which commands I ran in what order) and is available online at: http://mailman.ds9a.nl/pipermail/lartc/2004q2/012664.html I also posted it to comp.os.linux.networking (<863c53xef1.fsf@xxxxxxxxxxxxxxxx>): http://groups.google.ca/groups?selm=863c53xef1.fsf%40number6.magda.ca ----- Forwarded message from David Magda <dmagda+lartc@xxxxxxxxxxxxx> ----- On Thu, Jun 10, 2004 at 03:35:49PM -0400, David Magda wrote: [...] > ______ > | |- ppp0 -- Dynamic IP (PPPoE on eth2) > Internal---- eth0 | GW | > |____|- eth1 -- Static IP -> Static's GW > [...] > Using tcpdump I get the following results. This is listening on > eth1 as I try to SSH to the destination from an internal box (using > lynx to connect to the same destination results in a web page): [...] Examing the output of tcpdump a bit more closely, it seems that the host where the SSH client is trying to connect from never gets the ACK in the TCP setup handshake. It's being sent by the server, it's received on the external interface of the the gateway, but it never makes it to the internal network. The client machine keeps trying to setup a TCP connection, but never receives the ACK. This is the interface (the client keeps trying to setup the TCP connection): tcpdump: listening on eth0 02:26:10.873080 [SSH client].37705 > [SSH server].22: S \ 769441999:769441999(0) win 5840 <mss 1460,sackOK,timestamp \ 6184875090,nop,wscale 0> (DF) [tos 0x10] 02:26:13.866409 [SSH client].37705 > [SSH server].22: S \ 769441999:769441999(0) win 5840 <mss 1460,sackOK,timestamp \ 6184878090,nop,wscale 0> (DF) [tos 0x10] The external interface is getting the ACK (not from the same session, but gets the point accross): 02:26:11.527294 [GW Ext. IP].ssh > [SSH server].49161: P \ 224:336(112) ack 1 win 10944 <nop,nop,timestamp 557609690 \ 1169951> (DF) [tos 0x10] The ACK for the TCP connection setup is being sent by the server: tcpdump: listening on fxp0 02:26:10.933176 [SSH server NATed].37705 > [SSH server].22: S \ 769441999:769441999(0) win 5840 <mss 1400,sackOK,timestamp \ 6184875090,nop,wscale 0> (DF) [tos 0x10] 02:26:10.933226 [SSH server].22 > [SSH server NATed].37705: S \ 1054657654:1054657654(0) ack 769442000 win 65535 \ <mss 1452,nop,wscale0,nop,nop,timestamp 1071666 618487509> (DF) 02:26:13.923678 [SSH server].22 > [SSH server NATed].37705: S \ 1054657654:1054657654(0) ack 769442000 win 65535 \ <mss 1452,nop,wscale0,nop,nop,timestamp 1071966 618487509> (DF) 02:26:13.926659 [SSH server NATed].37705 > [SSH server].22: S \ 769441999:769441999(0) win 5840 <mss 1400,sackOK,timestamp \ 6184878090,nop,wscale 0> (DF) [tos 0x10] 02:26:13.926712 [SSH server].22 > [SSH server NATed].37705: S \ 1054657654:1054657654(0) ack 769442000 win 65535 \ <mss 1452,nop,wscale0,nop,nop,timestamp 1071966 618487809> (DF) 02:26:19.923038 [SSH server].22 > [SSH server NATed].37705: S \ 1054657654:1054657654(0) ack 769442000 win 65535 \ <mss 1452,nop,wscale0,nop,nop,timestamp 1072566 618487809> (DF) I've tried doing an SSH connection to multiple hosts and it's always the same thing. Here are my iptable rules: gw2:~# iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere SNAT all -- anywhere anywhere to:<Static IP> Chain OUTPUT (policy ACCEPT) target prot opt source destination gw2:~# iptables -L -t mangle Chain PREROUTING (policy ACCEPT) target prot opt source destination MARK tcp -- 192.168.108.0/24 anywhere tcp \ dpt:ssh MARK set 0x4 Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination IP rule list: gw2:~# ip rule list 0: from all lookup local 32765: from all fwmark 4 lookup 4 32766: from all lookup main 32767: from all lookup default Routing tables: gw2:/home/mpathix# ip route show table main <PPPoE peer> dev ppp0 proto kernel scope link src 69.158.104.154 63.250.109.128/29 dev eth1 proto kernel scope link src <Static IP> 192.168.108.0/24 dev eth0 proto kernel scope link src <GW's Internal IP> default via <PPPoE peer> dev ppp0 gw2:/home/mpathix# ip route show table 4 <PPPoE peer> dev ppp0 proto kernel scope link src 69.158.104.154 63.250.109.128/29 dev eth1 proto kernel scope link src <Static IP> 192.168.108.0/24 dev eth0 proto kernel scope link src <Static IP> default via <Static's GW> dev eth1 So basically packets are getting out, but they're not getting back in. Any suggestions?
