if i remove the rule for transparent redirection from my firewall script then it starts working well. what can be the connection of port 80 transparent redirection with samba
plz help me out. im in much trouble
Regards Azeem
From: <alexis@xxxxxxxxxxx> To: "azeem ahmad" <azeem484@xxxxxxxxxxx> CC: <netfilter@xxxxxxxxxxxxxxxxxxx> Subject: RE: iptables and samba Date: Thu, 27 May 2004 16:28:35 -0000
it seems a name resolution issue.
check if you're using WINS or DNS and make sure you're allowing those ports in orden to resolve the names. and it will work just fine
azeem ahmad <azeem484@xxxxxxxxxxx> dijo:
>
> no one out there could help me?
>
> >From: "azeem ahmad" <azeem484@xxxxxxxxxxx>
> >To: netfilter@xxxxxxxxxxxxxxxxxxx
> >Subject: iptables and samba
> >Date: Sun, 23 May 2004 09:20:52 +0000
> >
> >hi
> >i m using the script below
> >---------------------------------------------------------------------------
----------------------------------------------------------
> >iptables -F
> >iptables -t nat -F
> >iptables -P INPUT DROP
> >iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
> >iptables -A INPUT -i eth0 -p tcp --dport 8080 -j ACCEPT
> >iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT
> >iptables -A INPUT -i eth0 -p tcp --dport 53 -j ACCEPT
> >iptables -A INPUT -i eth0 -p udp --dport 53 -j ACCEPT
> >iptables -A INPUT -i eth0 -p udp --dport 137 -j ACCEPT
> >iptables -A INPUT -i eth0 -p udp --dport 138 -j ACCEPT
> >iptables -A INPUT -i eth0 -p tcp --dport 139 -j ACCEPT
> >
> >iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080
> >#iptables -t nat -A PREROUTING -p udp --dport 80 -j REDIRECT --to-port 8080
> >
> >iptables -P FORWARD DROP
> >iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 21 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 443 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 5000 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 5001 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 5005 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 5050 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 6660:6670 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 7000 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 28805 -j ACCEPT
> >iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT
> >
> >iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
> >---------------------------------------------------------------------------
----------------------------------------------------------
> >
> >i have two shares on samba server "Soft and linux" in these shares there
> >are many folders. whenever i run the above script and then i open the
share
> >it takes atleast 4 minutes to open the share. but it doesnt take time
> >while browsing inside share.
> >mean there is a folder on soft share like soft/adobe/acrobat/acrobat6
> >when i double click on soft it takes atleast 4 minutes but after that when
> >i click on adobe then acrobat then acrobat6 it takes now time it just
brose
> >them normally. same problem is with the other share named linux.
> >but if i dont run this script then all shares work fine with no delay
> >
> >i dont know what is the udp port 80 for but i just saw its traffic on my
> >network in iptraf so i included it in my script
> >
> >Regards
> >Azeem
> >
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
