On Tuesday 27 April 2004 13:35, sschlesi@xxxxxxxxx wrote: > I'm trying to stop broadcasts getting forwarded, but I'm not sure how > to do this. i read that *.255 - which are afaik broadcast addresses - My first question is why are broadcasts getting forwarded anyway? Neither ethernet or IP broadcasts should leave your subnet. How and where exactly are broadcasts being forwarded? IP addresses ending in .255 are not always broadcast addresses. Any subnet larger than class C (/24) can span more than one "block" of 256 IP addresses. > doesnt guarantie that its a broadcast. then i read that its possible by > matching the mac address, because broadcast will have ff:ff:ff:ff:ff:ff > . but I'm not sure if that's all nonsense. There is the difference here between an IP broadcast and an ethernet broadcast. IP broadcasts are sent to the ethernet broadcast address [1], so you may be able to do a MAC match. According to the manual page I have here, the module "mac" only offers a --mac-source option but there are more options in PoM I believe, you may want to check the mailing list archives. David 1- A ping to the broadcast address on a LAN: 13:44:59.765871 0:10:XX:XX:XX:XX Broadcast ip 98: 192.168.0.100 > 192.168.0.255: icmp: echo request (DF)
