> Enviado el: Lunes, 19 de Abril de 2004 08:53 a.m. > > why not to use iproute2 adding a new ip address to the interface > and filter > with the source? > > like > > ip add add 192.168.0.1/24 dev eth0 > ip add add 192.168.1.1/24 dev eth0 > > and then apply the rules using the source address and not the interface??? > > could it help??? Could work, never tryed it, but how do i set it up to work on boot? i use RedHat 7.3 and have a /etc/sysconfig/network-scripts/ifcfg-eth0 file that has the next parameters: DEVICE="eth0" IPADDR="192.168.1.1" NETMASK="255.255.255.0" NETWORK=192.168.1.0 ONBOOT="yes" Do i just simple add another IPADDR line? Thanks Rodrigo > > > ----- Original Message ----- > From: "Rodrigo Haces" <rhaces_chistes@xxxxxxxxxxxx> > To: <netfilter@xxxxxxxxxxxxxxxxxxx> > Sent: Monday, April 19, 2004 12:41 PM > Subject: IP Alias with iptables > > > > Hi: > > > > I have only one network adapter in my Server, but i need to have 2 > different > > networks, 192.168.1.0 to the MAC addresses i know and 192.168.0.0 to the > MAC > > addresses i dont't know, i have managed this by makin mi eth0 to > 192.168.1.1 > > and an alias eth0:0 to 192.168.0.1, everythings ok, but i'm also sharing > > internet, but when i start the rule to the eth0:0 it sends me > an error. Is > > there a way to use IP Aliasing with iptables? if not, is there a way to > > create an eth0 and eth1 witn the same adapter? > > > > Thanks > > > > Rodrigo > > > > > >
