Hi
I can have the log in the PREROUTING chain. But, I have to log
ACCEPTed
and DROPped packets in the INPUT / FORWARD chains separately.
I use the options in the LOG target to tag the ACCEPTed and DROPped
packets.
So, I cannot have them logged in the PREROUTING chain, where we will not
know
whether the packet is going to be accepted or dropped.
I have to log the messages in the INPUT or FORWARD chains, but with
the
original addresses.
Regards
Prabha
>From Antony@xxxxxxxxxxxxxxxxxxxx Wed Mar 3 09:53:24 2004
>From: Antony@xxxxxxxxxxxxxxxxxxxx (Antony Stone)
>Date: Wed, 3 Mar 2004 09:53:24 +0000
>Subject: Logging packets with original address
>In-Reply-To: <4045A0F1.F7366A69@xxxxxxxxxxxxxxx>
>References: <4045A0F1.F7366A69@xxxxxxxxxxxxxxx>
>Message-ID: <200403030953.24832.Antony@xxxxxxxxxxxxxxxxxxxx>
>On Wednesday 03 March 2004 9:10 am, prabha wrote:
> Hi
> I want to log some packets in the INPUT and FORWARD chains, but
with
> the original address of the packets. (ie) with the destination address
> before any DNAT rule has been applied on the packet in the PREROUTING
>chain.
>You cannot do this because packets pass through the INPUT chain after
they
>pass through PREROUTING.
> When the packet comes to the INPUT / FORWARD chains, it will be
> after any DNAT has been applied.
>Correct.
> I do not want the NATted address to be present in the logs, but the
original
> address as the received interface saw it. Is this possible?
>Put the LOG rule in the PREROUTING chain.
>Regards,
>
>Antony.
