Re: Iptables not working with RH9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Did you add on the iptables hook for bridging and
activate all the proper configuration settings?
I has a similar problem with 2.4.22 (under RH9)
because I forgot to  menuconfig and add in the proper
settings.

--- Derek Storvik <dstorvik@xxxxxxxxxxxxxxxxxxxxx>
wrote:
> Hello all
>   Hopefully someone can see my error.   
> I have been running RH7.3 with it's standard kernal
> version 2.4.18-3 for several months configured as a
> transparent bridging firewall. We recently purchased
> a new machine and wanted to install RH9 with its
> standard kernal 2.4.20( i think)I followed the same
> steps installed with iptables and bridging utils and
> used my same script file to setup the bridge with
> two nics and fill in all my rules. This didn't seem
> to work right and on further testing realized
> NOTHING was being filtered. I then rebooted and
> manualy set up the bridge and cleared all the tables
> and set the default policy to drop. SO at this point
> nothing should get through. Well it bridges
> everything, and the counters in iptables do not
> increment. The system acts as if it is not there
> what so ever.
> 
> here is the setup after the basic minimal install
> brctl addbr br0
> brctl addif br0 eth0
> brctl addif br0 eth1
> ifconfig eth1 0.0.0.0 promisc
> ifconfig eth0 0.0.0.0 promisc
> #bring up bridge with either of the next two
> commands
> ifconfig br0 up
> ip link set br0 up
> #both do the same thing  namely nothing
> iptables -X
> iptables -F
> iptables -P FORWARD DROP
> iptables -P INPUT DROP
> iptables -P OUTPUT DROP
> 
> This setup happily bridges packets right on through
> with no updates to the iptables counters.
> 
> I have been experimenting with devil linux as well
> recently and it exhibits the same problem. 
> 
> ip_forwarding is set to 0  as it has been on my
> working rh7.3 machine I tried setting it to 1 but
> that didn't help the problems. Im not 100% sure what
> exactl the ip_forwarding property corresponds to
> anyway.
> 
> any help would be greatly appreciated!
>    Thanks
>          Derek
> 
> 


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/


[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux