You'll need to be happy building your own custom redhat kernel - install from source patch-o-matic, adding the h323 patch recompile kernel, then boot into kernel install from source iptables then make sure your modules are loaded /sbin/modprobe -k ip_nat_h323 /sbin/modprobe -k ip_conntrack_h323 open ports 1503 and 1720 (389 and 522 if you want to use ils) and it should just work! Today Sundaram Ramasamy did spake thusly: > Can you post your iptables rules for this? > ----- Original Message ----- > From: George Vieira > To: dalive@xxxxxxxxxxxxx ; netfilter@xxxxxxxxxxxxxxxxxxx > Cc: Morrison, Trevor (Trevor) > Sent: Tuesday, August 12, 2003 6:48 AM > Subject: RE: h323 > > > Just use the H323 patch in p-o-m... I use it and it works fine for me.. > I don't know what this gatekeeper is.. but it's not needed if you can successfully patch in the pom module. > > -----Original Message----- > From: netfilter-admin@xxxxxxxxxxxxxxxxxxx [mailto:netfilter-admin@xxxxxxxxxxxxxxxxxxx]On Behalf Of DALive Editor > Sent: Tuesday, August 12, 2003 6:47 AM > To: netfilter@xxxxxxxxxxxxxxxxxxx > Cc: Morrison, Trevor (Trevor) > Subject: Re: h323 > > > Hello to this mailinglist, > > I'd also really like an awnser to the question bellow about H323, you have no idea how long I've toiled unsuccessfully. What is this about a patch? And I've read a little about the gatekeeper, could someone cluse me in further? > > Thanks alot - I'd given up hope > > > Morrison, Trevor (Trevor) wrote: > > Hi, > > I have a RH 9.0 box running iptables-1.2.8 and a 2.4.20 kernel with the h323 patch applied and recompiled. My network looks like this: > > dhcp from ISP > Win 2000 box <--------------------------->RH 9.0 Box<---------------------->Internet > 192.168.1.0/24 NAT 12.207.X.X/32 > > > > I have searched the archives back to September of last year trying to find what rules I need to apply to my iptables to allow h323 traffic through my NAT'd box. I am now more confused then before because the threads mentioned something about a gatekeeper that I need to run on a NAT box? > > What I am looking for is what are the rules that I need to put into my filter file and what other programs or procedures do I need to add to that I have the full features and functionality of Microsoft's Net Meeting from my Win 2k box. > > Thanks in Advance and sorry for bring this subject up again but I could not find the information in the previous threads. > > Trevor Morrison > -- Scott van Looy - email:me@xxxxxxxxxxxxxx | web:www.ethosuk.org.uk PGP Fingerprint: 7180 5543 C6C4 747B 7E74 802C 7CF9 E526 44D9 D4A7 ------------------------------------------- |/// /// /// /// WIDE LOAD /// /// /// ///| ------------------------------------------- "Irrigation of the land with sewater desalinated by fusion power is ancient. It's called 'rain'." -- Michael McClary, in alt.fusion
