Hi Ramin,
Thanks for the response. I'm using the same rule for logging on the
input and forward CHAINS ;-) but the behavior of the rule is different
depending on what chain it's in.. for input, by default it shows the MAC
addresses, but for forward, no MAC address is shown.
For instance:
iptables -A INPUT -j LOG --log-level notice --log-prefix " INPUT BLOCK: "
iptables -A FORWARD -j LOG --log-level info --log-prefix " FORWARD BLOCK: "
Jul 15 17:51:25 fw kernel: INPUT BLOCK: IN=eth0 OUT=
MAC=00:xx:xx:xx:xx:xx:00:yy:yy:yy:yy:yy:yy:00 SRC=t.t.t.t DST=r.r.r.r
LEN=64 TOS=0x00 PREC=0x00 TTL=128 ID=57828 PROTO=UDP SPT=1756 DPT=53 LEN=44
Jul 15 18:22:31 fw kernel: FORWARD BLOCK: IN=eth0 OUT=eth1 SRC=x.x.x.x
DST=y.y.y.y LEN=1492 TOS=0x00 PREC=0x00 TTL=253 ID=37603 DF PROTO=ICMP
TYPE=8 CODE=0 ID=0 SEQ=2
Any hints? Thanks
Forster
Ramin Dousti <ramin@xxxxxxxxxxxxxxxxxxxx>@lists.netfilter.org on 07/15/2003
05:59:36 PM
Sent by: netfilter-admin@xxxxxxxxxxxxxxxxxxx
To: aforster@xxxxxxxxxx
cc: netfilter@xxxxxxxxxxxxxxxxxxx
Subject: Re: logging mac address
On Tue, Jul 15, 2003 at 05:06:04PM -0300, Antonio Paulo Salgado Forster
wrote:
>
>
> Hello all,
>
> Is there any known way to log the mac address for packets blocked
on
> the forward table just like in the input table? I've been searching the
> archives and documentations but found nothing so far.
forward and input are chains and not tables. nat, mangle and filter are
tables. But anyhow, you just use the same rule for logging that you
used for INPUT logging and replace INPUT with FORWARD. You also need
to make sure what and where you're logging so that you don't DoS yourself.
Ramin
>
> Thanks in advance.
>
> Forster
>
>
