Hi,
We have redhat 7.1 installed on the laptop, while booting the machine its
giving "network: Bringing up interface eth0: failed" error message but
network is working ( I was able to use telnet, ssh service from other
computer). We are using Linksys network card.
How will I disable this error message.
boot.log file output:
Dec 23 17:50:48 ptce sysctl: net.ipv4.ip_forward = 0
Dec 23 17:50:48 ptce sysctl: net.ipv4.conf.all.rp_filter = 1
Dec 23 17:50:48 ptce sysctl: kernel.sysrq = 0
Dec 23 17:50:48 ptce network: Setting network parameters: succeeded
Dec 23 17:50:48 ptce network: Bringing up interface lo: succeeded
Dec 23 17:50:48 ptce ifup: Delaying eth0 initialization.
Dec 23 17:50:48 ptce network: Bringing up interface eth0: failed
Dec 23 17:50:51 ptce pcmcia: cardmgr.
Dec 23 17:50:52 ptce rc: Starting pcmcia: succeeded
[root@ptce log]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:04:5A:A0:B8:F5
inet addr:192.168.1.253 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38421 errors:0 dropped:0 overruns:0 frame:0
TX packets:533 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1711 errors:0 dropped:0 overruns:0 frame:0
TX packets:1711 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
[root@ptce log]# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03
)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI
Audio
Accelerator (rev 10)
00:08.1 Communication controller: ESS Technology ES1983S Maestro-3i PCI
Modem Ac
celerator (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M
AGP 2x
(rev 64)
alias parport_lowlevel parport_pc
alias sound-slot-0 maestro3
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null
2>&1
|| :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null
2>&1 |
| :
alias usb-controller usb-uhci
options i810 xfreeversion=41
options i810 xfreeversion=41
[root@ptce log]# lsmod
Module Size Used by Not tainted
parport_pc 17476 1 (autoclean)
lp 8576 0 (autoclean)
parport 33536 1 (autoclean) [parport_pc lp]
autofs 11172 1 (autoclean)
appletalk 23628 0 (autoclean)
ipx 19604 0 (autoclean)
pcnet_cs 13316 1
8390 8004 0 [pcnet_cs]
ds 8416 2 [pcnet_cs]
yenta_socket 12000 2
pcmcia_core 49888 0 [pcnet_cs ds yenta_socket]
ipchains 40040 0
usb-uhci 24324 0 (unused)
usbcore 71072 1 [usb-uhci]
