This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C27B60.CEB572F0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 8bit Dear all... I'm a Chinese and I don't think that my English is well . But I have a big problem in use IPTABLES . I've looked all the documents and FAQs , but I can't find a solution to solve my problem . At last I decide to ask you in my poor English ...^^|| I have a Linux server (Turbo Linux7.0 in kernel 2.4.9-3) to be my NAT server . I have make it running iptables-1.2.2-6 . It have 3 NIC(Network interface Card) eth0.eth1.eth2 . I have 1 LAN and 2 WAN interface they are 192.168.1.0/255.255.255.0 and 2 ADSL (one of my ADSL is pppoe another one is static IP) . Now I want to bind thy all in my NAT server . I rty to cut my LAN to 4 part are 192.168.1.0/255.255.255.192 & 192.168.1.64/255.255.255.192 & 192.168.1.128/255.255.255.192 & 192.168.1.192/255.255.255.192 . That I wish the preceding 3 part go out and in with the pppoe ADSL (ppp0) and the final part go through with static IP(because they are my servers) . My biggest problem is in Linux I can't set the default gateway otherwise the ppp0 will not work . But if ppp0 is working I can't find who to make my final part (192.168.1.192/26) go through the eth0 out or aome in ...-.-" I have do my best to explain my problem . If you can't understand my question maybe can find somebody who know my English or can talk in Chinese will better . Sincerely yours thanks a lot...^^ ------------------------------ ¹©©ö¦L¨ê¸ê°T«Ç Dinyi Printing CO. LTD RaykeySu raykey@dinyi.com.tw ------------------------------ ------=_NextPart_000_000A_01C27B60.CEB572F0 Content-Type: text/plain; name="iptable_question_mail.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="iptable_question_mail.txt" Dear all... I'm a Chinese and I don't think that my English is well . But I have a big problem in use IPTABLES . I've looked all the documents and FAQs , but I can't find a solution to = solve my problem . At last I decide to ask you in my poor English ...^^|| I have a Linux server (Turbo Linux7.0 in kernel 2.4.9-3) to be my NAT = server . I have make it running iptables-1.2.2-6 . It have 3 NIC(Network interface Card) eth0.eth1.eth2 . I have 1 LAN and 2 WAN interface they are 192.168.1.0/255.255.255.0 and = 2 ADSL (one of my ADSL is pppoe another one is static IP) . Now I want to bind thy all in my NAT server . I rty to cut my LAN to 4 part are 192.168.1.0/255.255.255.192 & = 192.168.1.64/255.255.255.192 & 192.168.1.128/255.255.255.192 & = 192.168.1.192/255.255.255.192 . That I wish the preceding 3 part go out and in with the pppoe ADSL = (ppp0) and the final part go through with static IP(because they are my = servers) . The following diagram would illustrate it quite well if I had any = artistic talent: |------------------| | 192.168.1.0 ~ 63 |----+ (ppp0) |------------------| | |-----------------------| |-----------| |>......|...........>DHCP (eth2)|-------|ADSL modem |------WAN |------------------| | | | |-----------| |192.168.1.64 ~ 128|----+ | | |------------------| | | | |-----------| | | 61.aa.bb.cc (eth0)|-------|61.aa.bb.cd|------WAN |------------------| | | | |-----------| |192.168.1.129~ 191|----+-------|192.168.1.254 (eth1) | (Gateway) |------------------| |-----------------------| | |>.............................>| |------------------| | |192.168.1.192~ 253|--------------------+ |------------------| My biggest problem is in Linux I can't set the default gateway otherwise = the ppp0 will not work . But if ppp0 is working I can't find who to make my final part = (192.168.1.192/26) go through the eth0 out or aome in ...-.-" I have do my best to explain my problem . If you can't understand my question maybe can find somebody who know my = English or can talk in Chinese will better . Sincerely yours thanks a lot...^^ ------=_NextPart_000_000A_01C27B60.CEB572F0--
