While at it: No need for iperf here, use socat.
This also reduces the script runtime.
Signed-off-by: Florian Westphal <fw@xxxxxxxxx>
---
.../selftests/net/netfilter/nft_nat_zones.sh | 193 +++++++-----------
1 file changed, 75 insertions(+), 118 deletions(-)
diff --git a/tools/testing/selftests/net/netfilter/nft_nat_zones.sh b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh
index b9ab37380f33..549f264b41f3 100755
--- a/tools/testing/selftests/net/netfilter/nft_nat_zones.sh
+++ b/tools/testing/selftests/net/netfilter/nft_nat_zones.sh
@@ -3,15 +3,14 @@
# Test connection tracking zone and NAT source port reallocation support.
#
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
# Don't increase too much, 2000 clients should work
# just fine but script can then take several minutes with
# KASAN/debug builds.
maxclients=100
-have_iperf=1
+have_socat=0
ret=0
# client1---.
@@ -31,12 +30,6 @@ ret=0
# NAT Gateway is supposed to do port reallocation for each of the
# connections.
-sfx=$(mktemp -u "XXXXXXXX")
-gw="ns-gw-$sfx"
-cl1="ns-cl1-$sfx"
-cl2="ns-cl2-$sfx"
-srv="ns-srv-$sfx"
-
v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null)
v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null)
v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null)
@@ -46,61 +39,29 @@ v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null)
cleanup()
{
- ip netns del $gw
- ip netns del $srv
- for i in $(seq 1 $maxclients); do
- ip netns del ns-cl$i-$sfx 2>/dev/null
- done
-
- sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null
- sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null
- sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null
- sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null
- sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null
- sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null
+ cleanup_all_ns
+
+ sysctl -q net.ipv4.neigh.default.gc_thresh1="$v4gc1" 2>/dev/null
+ sysctl -q net.ipv4.neigh.default.gc_thresh2="$v4gc2" 2>/dev/null
+ sysctl -q net.ipv4.neigh.default.gc_thresh3="$v4gc3" 2>/dev/null
+ sysctl -q net.ipv6.neigh.default.gc_thresh1="$v6gc1" 2>/dev/null
+ sysctl -q net.ipv6.neigh.default.gc_thresh2="$v6gc2" 2>/dev/null
+ sysctl -q net.ipv6.neigh.default.gc_thresh3="$v6gc3" 2>/dev/null
}
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without nft tool"
- exit $ksft_skip
-fi
+checktool "nft --version" echo "run test without nft tool"
+checktool "conntrack -V" "run test without conntrack tool"
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without ip tool"
- exit $ksft_skip
+if socat -h >/dev/null 2>&1; then
+ have_socat=1
fi
-conntrack -V > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without conntrack tool"
- exit $ksft_skip
-fi
-
-iperf3 -v >/dev/null 2>&1
-if [ $? -ne 0 ];then
- have_iperf=0
-fi
-
-ip netns add "$gw"
-if [ $? -ne 0 ];then
- echo "SKIP: Could not create net namespace $gw"
- exit $ksft_skip
-fi
-ip -net "$gw" link set lo up
+setup_ns gw srv
trap cleanup EXIT
-ip netns add "$srv"
-if [ $? -ne 0 ];then
- echo "SKIP: Could not create server netns $srv"
- exit $ksft_skip
-fi
-
ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv"
ip -net "$gw" link set veth0 up
-ip -net "$srv" link set lo up
ip -net "$srv" link set eth0 up
sysctl -q net.ipv6.neigh.default.gc_thresh1=512 2>/dev/null
@@ -110,55 +71,49 @@ sysctl -q net.ipv4.neigh.default.gc_thresh1=512 2>/dev/null
sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null
sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null
-for i in $(seq 1 $maxclients);do
- cl="ns-cl$i-$sfx"
+for i in $(seq 1 "$maxclients");do
+ setup_ns "cl$i"
- ip netns add "$cl"
- if [ $? -ne 0 ];then
- echo "SKIP: Could not create client netns $cl"
- exit $ksft_skip
- fi
- ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1
- if [ $? -ne 0 ];then
+ cl=$(eval echo \$cl"$i")
+ if ! ip link add veth"$i" netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1;then
echo "SKIP: No virtual ethernet pair device support in kernel"
exit $ksft_skip
fi
done
-for i in $(seq 1 $maxclients);do
- cl="ns-cl$i-$sfx"
- echo netns exec "$cl" ip link set lo up
+for i in $(seq 1 "$maxclients");do
+ cl=$(eval echo \$cl"$i")
echo netns exec "$cl" ip link set eth0 up
echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2
- echo netns exec "$gw" ip link set veth$i up
- echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2
- echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0
+ echo netns exec "$gw" ip link set "veth$i" up
+ echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".arp_ignore=2
+ echo netns exec "$gw" sysctl -q net.ipv4.conf.veth"$i".rp_filter=0
# clients have same IP addresses.
echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0
- echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0
+ echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 nodad
echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0
echo netns exec "$cl" ip route add default via dead:1::2 dev eth0
# NB: same addresses on client-facing interfaces.
- echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i
- echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i
+ echo netns exec "$gw" ip addr add 10.1.0.2/24 dev "veth$i"
+ echo netns exec "$gw" ip addr add dead:1::2/64 dev "veth$i" nodad
# gw: policy routing
- echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i))
- echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i))
+ echo netns exec "$gw" ip route add 10.1.0.0/24 dev "veth$i" table $((1000+i))
+ echo netns exec "$gw" ip route add dead:1::0/64 dev "veth$i" table $((1000+i))
echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i))
echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i))
- echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i))
+ echo netns exec "$gw" ip rule add fwmark "$i" lookup $((1000+i))
done | ip -batch /dev/stdin
ip -net "$gw" addr add 10.3.0.1/24 dev veth0
-ip -net "$gw" addr add dead:3::1/64 dev veth0
+ip -net "$gw" addr add dead:3::1/64 dev veth0 nodad
ip -net "$srv" addr add 10.3.0.99/24 dev eth0
-ip -net "$srv" addr add dead:3::99/64 dev eth0
+ip -net "$srv" addr add dead:3::99/64 dev eth0 nodad
-ip netns exec $gw nft -f /dev/stdin<<EOF
+ip netns exec "$gw" nft -f /dev/stdin<<EOF
table inet raw {
map iiftomark {
type ifname : mark
@@ -203,18 +158,22 @@ table inet raw {
}
}
EOF
+if [ "$?" -ne 0 ];then
+ echo "SKIP: Could not add nftables rules"
+ exit $ksft_skip
+fi
( echo add element inet raw iiftomark \{
for i in $(seq 1 $((maxclients-1))); do
- echo \"veth$i\" : $i,
+ echo \"veth"$i"\" : "$i",
done
- echo \"veth$maxclients\" : $maxclients \}
+ echo \"veth"$maxclients"\" : "$maxclients" \}
echo add element inet raw iiftozone \{
for i in $(seq 1 $((maxclients-1))); do
- echo \"veth$i\" : $i,
+ echo \"veth"$i"\" : "$i",
done
echo \"veth$maxclients\" : $maxclients \}
-) | ip netns exec $gw nft -f /dev/stdin
+) | ip netns exec "$gw" nft -f /dev/stdin
ip netns exec "$gw" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null
@@ -224,73 +183,72 @@ ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null
ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null
ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null
-for i in $(seq 1 $maxclients); do
- cl="ns-cl$i-$sfx"
- ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 &
- if [ $? -ne 0 ]; then
- echo FAIL: Ping failure from $cl 1>&2
- ret=1
- break
- fi
+for i in $(seq 1 "$maxclients"); do
+ cl=$(eval echo \$cl"$i")
+ ip netns exec "$cl" ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 &
done
-wait
+wait || ret=1
-for i in $(seq 1 $maxclients); do
- ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"
- if [ $? -ne 0 ];then
+[ "$ret" -ne 0 ] && "FAIL: Ping failure from $cl" 1>&2
+
+for i in $(seq 1 "$maxclients"); do
+ if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"; then
ret=1
echo "FAIL: counter icmp mismatch for veth$i" 1>&2
- ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2
+ ip netns exec "$gw" nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2
break
fi
done
-ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
-if [ $? -ne 0 ];then
+if ! ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }"; then
ret=1
- echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
- ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2
+ echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * maxclients)) bytes $((252 * maxclients)) }"
+ ip netns exec "$gw" nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2
fi
-if [ $ret -eq 0 ]; then
+if [ $ret -eq 0 ]; then
echo "PASS: ping test from all $maxclients namespaces"
fi
-if [ $have_iperf -eq 0 ];then
- echo "SKIP: iperf3 not installed"
+if [ $have_socat -eq 0 ];then
+ echo "SKIP: socat not installed"
if [ $ret -ne 0 ];then
exit $ret
fi
exit $ksft_skip
fi
-ip netns exec $srv iperf3 -s > /dev/null 2>&1 &
-iperfpid=$!
-sleep 1
+listener_ready()
+{
+ ss -N "$1" -lnt -o "sport = :5201" | grep -q 5201
+}
+
+ip netns exec "$srv" socat -u TCP-LISTEN:5201,fork STDOUT > /dev/null 2>/dev/null &
+socatpid=$!
+
+busywait 1000 listener_ready "$srv"
-for i in $(seq 1 $maxclients); do
+for i in $(seq 1 "$maxclients"); do
if [ $ret -ne 0 ]; then
break
fi
- cl="ns-cl$i-$sfx"
- ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null
- if [ $? -ne 0 ]; then
- echo FAIL: Failure to connect for $cl 1>&2
- ip netns exec $gw conntrack -S 1>&2
+ cl=$(eval echo \$cl"$i")
+ if ! ip netns exec "$cl" socat -4 -u STDIN TCP:10.3.0.99:5201,sourceport=10000 < /dev/null > /dev/null; then
+ echo "FAIL: Failure to connect for $cl" 1>&2
+ ip netns exec "$gw" conntrack -S 1>&2
ret=1
fi
done
if [ $ret -eq 0 ];then
- echo "PASS: iperf3 connections for all $maxclients net namespaces"
+ echo "PASS: socat connections for all $maxclients net namespaces"
fi
-kill $iperfpid
+kill $socatpid
wait
-for i in $(seq 1 $maxclients); do
- ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null
- if [ $? -ne 0 ];then
+for i in $(seq 1 "$maxclients"); do
+ if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null;then
ret=1
echo "FAIL: can't find expected tcp entry for veth$i" 1>&2
break
@@ -300,8 +258,7 @@ if [ $ret -eq 0 ];then
echo "PASS: Found client connection for all $maxclients net namespaces"
fi
-ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec "$gw" nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null;then
ret=1
echo "FAIL: cannot find return entry on veth0" 1>&2
fi
--
2.43.2
