Same patch as previous one, but for ebtables. To build a kernel that only supports ebtables-nft, the builtin tables need to be disabled, i.e.: CONFIG_BRIDGE_EBT_BROUTE=n CONFIG_BRIDGE_EBT_T_FILTER=n CONFIG_BRIDGE_EBT_T_NAT=n Signed-off-by: Florian Westphal <fw@xxxxxxxxx> --- net/bridge/netfilter/Kconfig | 7 +++++++ net/bridge/netfilter/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index 7f304a19ac1b..104c0125e32e 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -39,6 +39,10 @@ config NF_CONNTRACK_BRIDGE To compile it as a module, choose M here. If unsure, say N. +# old sockopt interface and eval loop +config BRIDGE_NF_EBTABLES_LEGACY + tristate + menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" depends on BRIDGE && NETFILTER && NETFILTER_XTABLES @@ -55,6 +59,7 @@ if BRIDGE_NF_EBTABLES # config BRIDGE_EBT_BROUTE tristate "ebt: broute table support" + select BRIDGE_NF_EBTABLES_LEGACY help The ebtables broute table is used to define rules that decide between bridging and routing frames, giving Linux the functionality of a @@ -65,6 +70,7 @@ config BRIDGE_EBT_BROUTE config BRIDGE_EBT_T_FILTER tristate "ebt: filter table support" + select BRIDGE_NF_EBTABLES_LEGACY help The ebtables filter table is used to define frame filtering rules at local input, forwarding and local output. See the man page for @@ -74,6 +80,7 @@ config BRIDGE_EBT_T_FILTER config BRIDGE_EBT_T_NAT tristate "ebt: nat table support" + select BRIDGE_NF_EBTABLES_LEGACY help The ebtables nat table is used to define rules that alter the MAC source address (MAC SNAT) or the MAC destination address (MAC DNAT). diff --git a/net/bridge/netfilter/Makefile b/net/bridge/netfilter/Makefile index 1c9ce49ab651..b9a1303da977 100644 --- a/net/bridge/netfilter/Makefile +++ b/net/bridge/netfilter/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_NFT_BRIDGE_REJECT) += nft_reject_bridge.o # connection tracking obj-$(CONFIG_NF_CONNTRACK_BRIDGE) += nf_conntrack_bridge.o -obj-$(CONFIG_BRIDGE_NF_EBTABLES) += ebtables.o +obj-$(CONFIG_BRIDGE_NF_EBTABLES_LEGACY) += ebtables.o # tables obj-$(CONFIG_BRIDGE_EBT_BROUTE) += ebtable_broute.o -- 2.43.0
