Hi,
On Fri, Dec 03, 2021 at 12:34:52AM -0800, Simon Kirby wrote:
> On Wed, Mar 27, 2019 at 10:30:27AM +0100, Florian Westphal wrote:
>
> > Simon Kirby <sim@xxxxxxxxxx> wrote:
> > > We have been successfully using nft dnat and IPVS in DR mode on 4.9, 4.14
> > > kernels, but since upgrading to 4.19, such rules now appear to miss the
> > > IPVS input hook and instead appear to hit localhost (and "tcpdump -ni lo"
> > > shows the packets) instead of being forwarded to a real server.
> > >
> > > I bisected this to 9971a514ed2697e542f3984a6162eac54bb1da98 ("netfilter:
> > > nf_nat: add nat type hooks to nat core").
> > >
> > > It should be pretty easy to see this with a minimal setup:
> > >
> > > /etc/nftables.conf:
> > >
> > > table ip nat {
> > > chain prerouting {
> > > type nat hook prerouting priority 0;
This priority number does not look correct, this should be -100 which
is NF_IP_PRI_NAT_DST (in recent nftables versions you can use:
... priority dstnat;
> > > ip daddr $ext_ip dnat to $vip
Why do you need DNAT in this case? In the IPVS DR mode virtual server
and the load balancer already own the same IP address.
> > > }
> > > chain postrouting {
> > > type nat hook postrouting priority 100;
> > >
> > > # In theory this hook no longer needed since this commit,
> > > # but we also need to do some unrelated snatting.
> > > }
Your configuration is also missing the input/output nat hooks, which
also need to be registered manually. Otherwise, NAT and locally
generated traffic might break.
In the kernel 4.14 and below, all of the NAT hooks in nftables need to
be manually registered in order for NAT to work.
> > > }
> > >
> > > /etc/sysctl.conf:
> > >
> > > net.ipv4.conf.all.accept_local = 1
> > > net.ipv4.vs.conntrack = 1
> > >
> > > IPVS DR setup:
> > >
> > > ipvsadm -A -t $vip:80 -s wrr
> > > ipvsadm -a -t $vip:80 -r $real_ip:80 -g -w 100
> >
> > I have a hard time figuring out how to expand $ext_ip, $vip and $real_ip,
> > and where to place those addresses on the nft machine.
>
> I had some time to set up some test VMs for this, which I can post if
> you'd like (several GB), or I can tarball up the configs.
>
> Our setup still doesn't work in 5.15, and we have some LVS servers held
> up on 4.14 kernels that are the last working stable branch.
>
> LVS expects the VIPs to route to loopback in order to reach the ipvs
> hook, and since 9971a514ed2697e542f3984a6162eac54bb1da98 ("netfilter:
> nf_nat: add nat type hooks to nat core"), the nftrace output changes to
> show that the ipvs_vs_dr_xmit packet is oif "lo" rather than "enp1s0".
>
> With perf probes, I found that the reason the outbound device is changing
> is that there is an nft hook that ends up calling ip_route_me_harder().
This is called from local_out path for NAT, is the $vip owned by your
load balancer? Then the route lookup is correct since it points to the
address that your load balancer owns.
> This function is not called prior to this change, but we can make it be
> called even on 4.14 by hooking nat output (with no rules) or route output
> with anything modifying, such as "mark set 1".
>
> We just didn't happen to hook this previously, so it worked for us, but
> after this change, all hooks (including output) are always applied.
>
> # perf probe -a 'ip_route_me_harder%return retval=$retval'
> # perf record -g -e probe:ip_route_me_harder__return -aR sleep 4
> (send a test connection)
> # perf script
> swapper 0 [000] 1654.547622: probe:ip_route_me_harder__return: (ffffffff819ac910 <- ffffffffa002b8f6) retval=0x0
> ffffffff810564b0 kretprobe_trampoline+0x0 (vmlinux-4.14.252)
> ffffffffa0084090 nft_nat_ipv4_local_fn+0x10 ([nft_chain_nat_ipv4])
> ffffffff8193e793 nf_hook_slow+0x43 (vmlinux-4.14.252)
> ffffffffa004af2b ip_vs_dr_xmit+0x18b ([ip_vs])
> ffffffffa003fb2e ip_vs_in+0x58e ([ip_vs])
> ffffffffa00400d1 ip_vs_local_request4+0x21 ([ip_vs])
> ffffffffa00400e9 ip_vs_remote_request4+0x9 ([ip_vs])
> ffffffff8193e793 nf_hook_slow+0x43 (vmlinux-4.14.252)
> ffffffff8195c48b ip_local_deliver+0x7b (vmlinux-4.14.252)
> ffffffff8195c0b8 ip_rcv_finish+0x1f8 (vmlinux-4.14.252)
> ffffffff8195c7b7 ip_rcv+0x2e7 (vmlinux-4.14.252)
> ffffffff818dc113 __netif_receive_skb_core+0x883 (vmlinux-4.14.252)
> (pruned a bit)
>
> On 5.15, the trace is similar, but nft_nat_ipv4_local_fn is gone
> (nft_nat_do_chain is inlined).
>
> nftrace output through "nft monitor trace" shows it changing the packet
> dest between filter output and nat postrouting:
>
> ...
> trace id 32904fd3 ip filter output packet: oif "enp1s0" @ll,0,112 0x5254009039555254002ace280800 ip saddr 192.168.7.1 ip daddr 10.99.99.10 ip dscp 0x04 ip ecn not-ect ip ttl 63 ip id 5753 ip length 60 tcp sport 58620 tcp dport 80 tcp flags == syn tcp window 64240
> trace id 32904fd3 ip filter output verdict continue
> trace id 32904fd3 ip filter output policy accept
> trace id 32904fd3 ip nat postrouting packet: iif "enp1s0" oif "lo" ether saddr 52:54:00:2a:ce:28 ether daddr 52:54:00:90:39:55 ip saddr 192.168.7.1 ip daddr 10.99.99.10 ip dscp 0x04 ip ecn not-ect ip ttl 63 ip id 5753 ip length 60 tcp sport 58620 tcp dport 80 tcp flags == syn tcp window 64240
> trace id 32904fd3 ip nat postrouting verdict continue
> trace id 32904fd3 ip nat postrouting policy accept
>
> On 4.14 without hooking nat output, the oif for nat postrouting remains
> unchanged ("enp1s0").
>
> If we avoid the nftables dnat rule and connect directly to the LVS VIP,
> it still works on newer kernels, I suspect because nf_nat_ipv4_fn()
> doesn't match. If we dnat directly to the DR VIP without LVS, it works
> because the dest is not loopback, as expected. It's the combination of
> these two that used to work, but now doesn't.
Is your load balancer owning the IP address that you use to dnat?
> Our specific use case here is that we're doing the dnat from public to
> rfc1918 space, and the rfc1918 LVS VIPs support some hairpinning cases.
>
> Any ideas?
>
> Simon-
