[PATCH] treewide: Remove leading spaces in Kconfig files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are a few occurences of leading spaces before tabs in a couple of
Kconfig files. Remove them by running the following command:

  $ find . -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@xxxxxxxxxxxxx>
---
 arch/arm/mach-omap1/Kconfig     | 12 ++++++------
 arch/arm/mach-vt8500/Kconfig    |  6 +++---
 arch/arm/mm/Kconfig             | 10 +++++-----
 drivers/char/hw_random/Kconfig  |  8 ++++----
 drivers/net/usb/Kconfig         | 10 +++++-----
 drivers/net/wan/Kconfig         |  4 ++--
 drivers/scsi/Kconfig            |  2 +-
 drivers/uio/Kconfig             |  2 +-
 drivers/video/backlight/Kconfig | 10 +++++-----
 drivers/virtio/Kconfig          |  2 +-
 drivers/w1/masters/Kconfig      |  6 +++---
 fs/proc/Kconfig                 |  4 ++--
 init/Kconfig                    |  2 +-
 net/netfilter/Kconfig           |  2 +-
 net/netfilter/ipvs/Kconfig      |  2 +-
 15 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 9536b8f3c07d..208c700c2455 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
@@ -85,14 +85,14 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
 
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
-    	help
+	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
 	  and camera connector.  Say Y here if you have this board.
@@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index d01cdd9ad9c7..408e405ae568 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -9,9 +9,9 @@ config ARCH_VT8500
 
 config ARCH_WM8505
 	bool "VIA/Wondermedia 85xx and WM8650"
- 	depends on ARCH_MULTI_V5
- 	select ARCH_VT8500
- 	select CPU_ARM926T
+	depends on ARCH_MULTI_V5
+	select ARCH_VT8500
+	select CPU_ARM926T
 
 config ARCH_WM8750
 	bool "WonderMedia WM8750"
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 35f43d0aa056..7a4a04bafa92 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -123,13 +123,13 @@ config CPU_ARM925T
 	select CPU_PABRT_LEGACY
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
- 	help
- 	  The ARM925T is a mix between the ARM920T and ARM926T, but with
+	help
+	  The ARM925T is a mix between the ARM920T and ARM926T, but with
 	  different instruction and data caches. It is used in TI's OMAP
- 	  device family.
+	  device family.
 
- 	  Say Y if you want support for the ARM925T processor.
- 	  Otherwise, say N.
+	  Say Y if you want support for the ARM925T processor.
+	  Otherwise, say N.
 
 # ARM926T
 config CPU_ARM926T
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1fe006f3f12f..0e1e97680f08 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -168,14 +168,14 @@ config HW_RANDOM_OMAP
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU
 	default HW_RANDOM
 	help
- 	  This driver provides kernel-side support for the Random Number
+	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
 	  multimedia processors, and Marvell Armada 7k/8k SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-rng.
 
- 	  If unsure, say Y.
+	  If unsure, say Y.
 
 config HW_RANDOM_OMAP3_ROM
 	tristate "OMAP3 ROM Random Number Generator support"
@@ -485,13 +485,13 @@ config HW_RANDOM_NPCM
 	depends on ARCH_NPCM || COMPILE_TEST
 	default HW_RANDOM
 	help
- 	  This driver provides support for the Random Number
+	  This driver provides support for the Random Number
 	  Generator hardware available in Nuvoton NPCM SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called npcm-rng.
 
- 	  If unsure, say Y.
+	  If unsure, say Y.
 
 config HW_RANDOM_KEYSTONE
 	depends on ARCH_KEYSTONE || COMPILE_TEST
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index fbbe78643631..179308782888 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,7 +169,7 @@ config USB_NET_AX8817X
 	  This option adds support for ASIX AX88xxx based USB 2.0
 	  10/100 Ethernet adapters.
 
- 	  This driver should work with at least the following devices:
+	  This driver should work with at least the following devices:
 	    * Aten UC210T
 	    * ASIX AX88172
 	    * Billionton Systems, USB2AR
@@ -220,13 +220,13 @@ config USB_NET_CDCETHER
 	  CDC Ethernet is an implementation option for DOCSIS cable modems
 	  that support USB connectivity, used for non-Microsoft USB hosts.
 	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
- 	  This driver should work with at least the following devices:
+	  This driver should work with at least the following devices:
 
 	    * Dell Wireless 5530 HSPA
- 	    * Ericsson PipeRider (all variants)
+	    * Ericsson PipeRider (all variants)
 	    * Ericsson Mobile Broadband Module (all variants)
- 	    * Motorola (DM100 and SB4100)
- 	    * Broadcom Cable Modem (reference design)
+	    * Motorola (DM100 and SB4100)
+	    * Broadcom Cable Modem (reference design)
 	    * Toshiba (PCX1100U and F3507g/F3607gw)
 	    * ...
 
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 83c9481995dd..473df2505c8e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -49,7 +49,7 @@ config COSA
 	  network device.
 
 	  You will need user-space utilities COSA or SRP boards for downloading
- 	  the firmware to the cards and to set them up. Look at the
+	  the firmware to the cards and to set them up. Look at the
 	  <http://www.fi.muni.cz/~kas/cosa/> for more information. You can also
 	  read the comment at the top of the <file:drivers/net/wan/cosa.c> for
 	  details about the cards and the driver itself.
@@ -108,7 +108,7 @@ config HDLC
 	  Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
 	  Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
 
- 	  To compile this driver as a module, choose M here: the
+	  To compile this driver as a module, choose M here: the
 	  module will be called hdlc.
 
 	  If unsure, say N.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3d114be5b662..c5612896cdb9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -311,7 +311,7 @@ source "drivers/scsi/cxlflash/Kconfig"
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
 	depends on SGI_HAS_WD93 && SCSI
-  	help
+	help
 	  If you have a Western Digital WD93 SCSI controller on
 	  an SGI MIPS system, say Y.  Otherwise, say N.
 
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 5531f3afeb21..2e16c5338e5b 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -18,7 +18,7 @@ config UIO_CIF
 	depends on PCI
 	help
 	  Driver for Hilscher CIF DeviceNet and Profibus cards.  This
-  	  driver requires a userspace component called cif that handles
+	  driver requires a userspace component called cif that handles
 	  all of the heavy lifting and can be found at:
 	        <http://www.osadl.org/projects/downloads/UIO/user/>
 
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d83c87b902c1..a967974f6cd6 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -129,11 +129,11 @@ config LCD_HX8357
 	  driver.
 
   config LCD_OTM3225A
-  	tristate "ORISE Technology OTM3225A support"
-  	depends on SPI
-  	help
-  	  If you have a panel based on the OTM3225A controller
-  	  chip then say y to include a driver for it.
+	tristate "ORISE Technology OTM3225A support"
+	depends on SPI
+	help
+	  If you have a panel based on the OTM3225A controller
+	  chip then say y to include a driver for it.
 
 endif # LCD_CLASS_DEVICE
 
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index ce1b3f6ec325..3b3644d60d11 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -128,7 +128,7 @@ config VIRTIO_MMIO
 	 This drivers provides support for memory mapped virtio
 	 platform device driver.
 
- 	 If unsure, say N.
+	 If unsure, say N.
 
 config VIRTIO_MMIO_CMDLINE_DEVICES
 	bool "Memory mapped virtio devices parameter parsing"
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 24b9a8e05f64..32e993ea6f96 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -17,12 +17,12 @@ config W1_MASTER_MATROX
 
 config W1_MASTER_DS2490
 	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
-  	depends on USB
-  	help
+	depends on USB
+	help
 	  Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
 	  for example DS9490*.
 
-  	  This support is also available as a module.  If so, the module
+	  This support is also available as a module.  If so, the module
 	  will be called ds2490.
 
 config W1_MASTER_DS2482
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
index c930001056f9..e8410a99a0ca 100644
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
@@ -81,10 +81,10 @@ config PROC_SYSCTL
 	  limited in memory.
 
 config PROC_PAGE_MONITOR
- 	default y
+	default y
 	depends on PROC_FS && MMU
 	bool "Enable /proc page monitoring" if EXPERT
- 	help
+	help
 	  Various /proc files exist to monitor process memory utilization:
 	  /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap,
 	  /proc/kpagecount, and /proc/kpageflags. Disabling these
diff --git a/init/Kconfig b/init/Kconfig
index 1ea12c64e4c9..9f1cde503739 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2149,7 +2149,7 @@ config MODULE_SRCVERSION_ALL
 	help
 	  Modules which contain a MODULE_VERSION get an extra "srcversion"
 	  field inserted into their modinfo section, which contains a
-    	  sum of the source files which made it.  This helps maintainers
+	  sum of the source files which made it.  This helps maintainers
 	  see exactly which source was used to build a module (since
 	  others sometimes change the module source without updating
 	  the version).  With this option, such a "srcversion" field
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 56a2531a3402..172d74560632 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -816,7 +816,7 @@ config NETFILTER_XT_TARGET_CLASSIFY
 	  the priority of a packet. Some qdiscs can use this value for
 	  classification, among these are:
 
-  	  atm, cbq, dsmark, pfifo_fast, htb, prio
+	  atm, cbq, dsmark, pfifo_fast, htb, prio
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index d61886874940..271da8447b29 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -318,7 +318,7 @@ config IP_VS_MH_TAB_INDEX
 comment 'IPVS application helper'
 
 config	IP_VS_FTP
-  	tristate "FTP protocol helper"
+	tristate "FTP protocol helper"
 	depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \
 		NF_CONNTRACK_FTP
 	select IP_VS_NFCT
-- 
2.27.0




[Index of Archives]     [Netfitler Users]     [Berkeley Packet Filter]     [LARTC]     [Bugtraq]     [Yosemite Forum]

  Powered by Linux