Re: [PATCH v3] net: netfilter: Fix rpfilter dropping vrf packets by mistake

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 19, 2019 at 09:49:04AM +0000, linmiaohe wrote:
> 
> On 2019/6/18 23:58, Pablo Neira Ayuso wrote:
> > On Thu, Apr 25, 2019 at 09:43:53PM +0800, linmiaohe wrote:
> >> From: Miaohe Lin <linmiaohe@xxxxxxxxxx>
> >>
> >> When firewalld is enabled with ipv4/ipv6 rpfilter, vrf
> >> ipv4/ipv6 packets will be dropped because in device is vrf but out 
> >> device is an enslaved device. So failed with the check of the 
> >> rpfilter.
> >>
> >> Signed-off-by: Miaohe Lin <linmiaohe@xxxxxxxxxx>
> >> ---
> >> --- a/net/ipv4/netfilter/ipt_rpfilter.c
> >> +++ b/net/ipv4/netfilter/ipt_rpfilter.c
> >> @@ -81,6 +81,7 @@ static bool rpfilter_mt(const struct sk_buff *skb, struct xt_action_param *par)
> >>  	flow.flowi4_mark = info->flags & XT_RPFILTER_VALID_MARK ? skb->mark : 0;
> >>  	flow.flowi4_tos = RT_TOS(iph->tos);
> >>  	flow.flowi4_scope = RT_SCOPE_UNIVERSE;
> >> +	flow.flowi4_oif = l3mdev_master_ifindex_rcu(xt_in(par));
> >>
> >>  	return rpfilter_lookup_reverse(xt_net(par), &flow, xt_in(par),
> >> --- a/net/ipv6/netfilter/ip6t_rpfilter.c
> >> +++ b/net/ipv6/netfilter/ip6t_rpfilter.c
> >> @@ -58,7 +58,9 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
> >>  	if (rpfilter_addr_linklocal(&iph->saddr)) {
> >>  		lookup_flags |= RT6_LOOKUP_F_IFACE;
> >>  		fl6.flowi6_oif = dev->ifindex;
> >> -	} else if ((flags & XT_RPFILTER_LOOSE) == 0)
> >> +	} else if (((flags & XT_RPFILTER_LOOSE) == 0) ||
> >> +		   (netif_is_l3_master(dev)) ||
> >> +		   (netif_is_l3_slave(dev)))
> >>  		fl6.flowi6_oif = dev->ifindex;
> >>
> >>  	rt = (void *)ip6_route_lookup(net, &fl6, skb, lookup_flags); @@
> >> -73,6 +75,12 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
> >>  		goto out;
> >>  	}
> >>
> >> +	if (netif_is_l3_master(dev)) {
> >> +		dev = dev_get_by_index_rcu(dev_net(dev), IP6CB(skb)->iif);
> >> +		if (!dev)
> >> +			goto out;
> >> +	}
> > 
> > So, for the l3 device cases this makes:
> > 
> > #1 ip6_route_lookup() to fetch the route, using the device in xt_in()
> >    (the _LOOSE flag is ignored for the l3 device case).
> > 
> > #2 If this is a l3dev master, then you make a global lookup for the
> >    device using IP6CB(skb)->iif.
> > 
> > #3 You check if route matches with the device, using the new device
> >    from the lookup:
> > 
> >    if (rt->rt6i_idev->dev == dev ...
> > 
> > If there is no other way to fix this, OK, that's fair enough.
> > 
> > Still this fix looks a bit tricky to me.
> > 
> > And this assymmetric between the IPv4 and IPv6 codebase looks rare.
> > 
> > Probably someone can explain me this in more detail? I'd appreciate.
> > 
> > Thanks!
> > 
>     Thanks for your reply. I will try to explain this in more detail.
>     Vrf device will pass through netfilter hook twice. One with skb->dev=l3mdev
> Slave device and another one with skb->dev=l3mdev master deivce.
>     If a device is an l3mdev,  l3mdev_master_ifindex_rcu will return l3mdev
> master device ifindex otherwise 0 . So for non l3mdev cases,  v4 version is
> as same as the previous one. And for l3mdev cases,  flow.flowi4_oif
> will be l3mdev master device ifindex, so we can do a fib lookup in l3mdev
> domain as expected. Since fib_info_nh_uses_dev help us handle the case with
> dev=l3mdev slave or master and  XT_RPFILTER_LOOSE do not lookup route
> table, we finish v4.
>     For v6 version we need to set fl6.flowi6_oif as we are supposed to lookup 
> fib in l3mdev domain even in XT_RPFILTER_LOOSE mode.
>     And fib result rt->rt6i_idev->dev is l3mdev slave device, we need change
> dev to enslaved l3mdev device when dev passed in is l3mdev master device.
>     The key is l3mdev will pass through netfilter hook twice with skb dev is l3mdev slave
> and master . And we need to set flowi6_oif as fib lookup should in the l3mdev
> domain.

Thanks for explaining.

Something must be wrong in all these helper function logic because
this new code logic is hard to follow for the IPv6 chunk...

Can you explore a more readable fix?

So I'm not inclined to quickly take this patch.

Thanks.



[Index of Archives]     [Netfitler Users]     [Berkeley Packet Filter]     [LARTC]     [Bugtraq]     [Yosemite Forum]

  Powered by Linux