These are 1:1 copies from legacy arptables repository.
Signed-off-by: Phil Sutter <phil@xxxxxx>
---
iptables/Makefile.am | 3 +
iptables/arptables-nft-restore.8 | 41 ++++
iptables/arptables-nft-save.8 | 37 ++++
iptables/arptables-nft.8 | 352 +++++++++++++++++++++++++++++++
4 files changed, 433 insertions(+)
create mode 100644 iptables/arptables-nft-restore.8
create mode 100644 iptables/arptables-nft-save.8
create mode 100644 iptables/arptables-nft.8
diff --git a/iptables/Makefile.am b/iptables/Makefile.am
index bfaf5e29685e5..c0f657eb02713 100644
--- a/iptables/Makefile.am
+++ b/iptables/Makefile.am
@@ -62,6 +62,9 @@ man_MANS = iptables.8 iptables-restore.8 iptables-save.8 \
xtables-nft.8 xtables-translate.8 xtables-legacy.8 \
iptables-translate.8 ip6tables-translate.8 \
xtables-monitor.8
+if ENABLE_NFTABLES
+man_MANS += arptables-nft.8 arptables-nft-restore.8 arptables-nft-save.8
+endif
CLEANFILES = iptables.8 xtables-monitor.8 \
iptables-translate.8 ip6tables-translate.8 \
xtables-config-parser.c xtables-config-syntax.c
diff --git a/iptables/arptables-nft-restore.8 b/iptables/arptables-nft-restore.8
new file mode 100644
index 0000000000000..4f2f623673415
--- /dev/null
+++ b/iptables/arptables-nft-restore.8
@@ -0,0 +1,41 @@
+.TH ARPTABLES-RESTORE 8 "Nov 07, 2013" "" ""
+.\"
+.\" Man page written by Jesper Dangaard Brouer <brouer@xxxxxxxxxx> based on a
+.\" Man page written by Harald Welte <laforge@xxxxxxxxxxxx>
+.\" It is based on the iptables-restore man page.
+.\"
+.\" This program is free software; you can redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as published by
+.\" the Free Software Foundation; either version 2 of the License, or
+.\" (at your option) any later version.
+.\"
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License
+.\" along with this program; if not, write to the Free Software
+.\" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+.\"
+.\"
+.SH NAME
+arptables-restore \(em Restore ARP Tables
+.SH SYNOPSIS
+\fBarptables\-restore
+.SH DESCRIPTION
+.PP
+.B arptables-restore
+is used to restore ARP Tables from data specified on STDIN or
+via a file as first argument.
+Use I/O redirection provided by your shell to read from a file
+.TP
+.B arptables-restore
+flushes (deletes) all previous contents of the respective ARP Table.
+.SH BUGS
+None known as of arptables-0.0.4 release
+.SH AUTHOR
+Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
+.SH SEE ALSO
+\fBarptables\-save\fP(8), \fBarptables\fP(8)
+.PP
diff --git a/iptables/arptables-nft-save.8 b/iptables/arptables-nft-save.8
new file mode 100644
index 0000000000000..34791a9c087f0
--- /dev/null
+++ b/iptables/arptables-nft-save.8
@@ -0,0 +1,37 @@
+.TH ARPTABLES-SAVE 8 "Nov 07, 2013" "" ""
+.\"
+.\" Man page written by Jesper Dangaard Brouer <brouer@xxxxxxxxxx> based on a
+.\" Man page written by Harald Welte <laforge@xxxxxxxxxxxx>
+.\" It is based on the iptables-save man page.
+.\"
+.\" This program is free software; you can redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as published by
+.\" the Free Software Foundation; either version 2 of the License, or
+.\" (at your option) any later version.
+.\"
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License
+.\" along with this program; if not, write to the Free Software
+.\" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+.\"
+.\"
+.SH NAME
+arptables-save \(em dump arptables rules to stdout
+.SH SYNOPSIS
+\fBarptables\-save
+.SH DESCRIPTION
+.PP
+.B arptables-save
+is used to dump the contents of an ARP Table in easily parseable format
+to STDOUT. Use I/O-redirection provided by your shell to write to a file.
+.SH BUGS
+None known as of arptables-0.0.4 release
+.SH AUTHOR
+Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
+.SH SEE ALSO
+\fBarptables\-restore\fP(8), \fBarptables\fP(8)
+.PP
diff --git a/iptables/arptables-nft.8 b/iptables/arptables-nft.8
new file mode 100644
index 0000000000000..3ce99e3757004
--- /dev/null
+++ b/iptables/arptables-nft.8
@@ -0,0 +1,352 @@
+.TH ARPTABLES 8 "June 2018"
+.\"
+.\" Man page originally written by Jochen Friedrich <jochen@xxxxxxxx>,
+.\" maintained by Bart De Schuymer.
+.\" It is based on the iptables man page.
+.\"
+.\" Iptables page by Herve Eychenne March 2000.
+.\"
+.\" This program is free software; you can redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as published by
+.\" the Free Software Foundation; either version 2 of the License, or
+.\" (at your option) any later version.
+.\"
+.\" This program is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License
+.\" along with this program; if not, write to the Free Software
+.\" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+.\"
+.\"
+.SH NAME
+arptables \- ARP table administration (legacy)
+.SH SYNOPSIS
+.BR "arptables " [ "-t table" ] " -" [ AD ] " chain rule-specification " [ options ]
+.br
+.BR "arptables " [ "-t table" ] " -" [ RI ] " chain rulenum rule-specification " [ options ]
+.br
+.BR "arptables " [ "-t table" ] " -D chain rulenum " [ options ]
+.br
+.BR "arptables " [ "-t table" ] " -" [ "LFZ" ] " " [ chain ] " " [ options ]
+.br
+.BR "arptables " [ "-t table" ] " -" [ "NX" ] " chain"
+.br
+.BR "arptables " [ "-t table" ] " -E old-chain-name new-chain-name"
+.br
+.BR "arptables " [ "-t table" ] " -P chain target " [ options ]
+
+.SH LEGACY
+This tool uses the old xtables/setsockopt framework, and is a legacy version
+of arptables. That means that a new, more modern tool exists with the same
+functionality using the nf_tables framework and you are encouraged to migrate now.
+The new binaries (formerly known as -compat) uses the same syntax and
+semantics than this legacy one.
+
+You can still use this legacy tool. You should probably get some specific
+information from your Linux distribution or vendor.
+More docs are available at https://wiki.nftables.org
+
+.SH DESCRIPTION
+.B arptables
+is a user space tool, it is used to set up and maintain the
+tables of ARP rules in the Linux kernel. These rules inspect
+the ARP frames which they see.
+.B arptables
+is analogous to the
+.B iptables
+user space tool, but
+.B arptables
+is less complicated.
+
+.SS CHAINS
+The kernel table is used to divide functionality into
+different sets of rules. Each set of rules is called a chain.
+Each chain is an ordered list of rules that can match ARP frames. If a
+rule matches an ARP frame, then a processing specification tells
+what to do with that matching frame. The processing specification is
+called a 'target'. However, if the frame does not match the current
+rule in the chain, then the next rule in the chain is examined and so forth.
+The user can create new (user-defined) chains which can be used as the 'target' of a rule.
+
+.SS TARGETS
+A firewall rule specifies criteria for an ARP frame and a frame
+processing specification called a target. When a frame matches a rule,
+then the next action performed by the kernel is specified by the target.
+The target can be one of these values:
+.IR ACCEPT ,
+.IR DROP ,
+.IR CONTINUE ,
+.IR RETURN ,
+an 'extension' (see below) or a user-defined chain.
+.PP
+.I ACCEPT
+means to let the frame through.
+.I DROP
+means the frame has to be dropped.
+.I CONTINUE
+means the next rule has to be checked. This can be handy to know how many
+frames pass a certain point in the chain or to log those frames.
+.I RETURN
+means stop traversing this chain and resume at the next rule in the
+previous (calling) chain.
+For the extension targets please see the
+.B "TARGET EXTENSIONS"
+section of this man page.
+.SS TABLES
+There is only one ARP table in the Linux
+kernel. The table is
+.BR filter.
+You can drop the '-t filter' argument to the arptables command.
+The -t argument must be the
+first argument on the arptables command line, if used.
+.TP
+.B "-t, --table"
+.br
+.BR filter ,
+is the only table and contains two (Linux kernels 2.4.X) or three (Linux kernels 2.6.0 and later) built-in chains:
+.B INPUT
+(for frames destined for the host),
+.B OUTPUT
+(for locally-generated frames) and
+.B FORWARD
+(for frames being forwarded by the bridge code). The
+.B FORWARD
+chain doesn't exist in Linux 2.4.X kernels.
+.br
+.br
+.SH ARPTABLES COMMAND LINE ARGUMENTS
+After the initial arptables command line argument, the remaining
+arguments can be divided into several different groups. These groups
+are commands, miscellaneous commands, rule-specifications, match-extensions,
+and watcher-extensions.
+.SS COMMANDS
+The arptables command arguments specify the actions to perform on the table
+defined with the -t argument. If you do not use the -t argument to name
+a table, the commands apply to the default filter table.
+With the exception of the
+.B "-Z"
+command, only one command may be used on the command line at a time.
+.TP
+.B "-A, --append"
+Append a rule to the end of the selected chain.
+.TP
+.B "-D, --delete"
+Delete the specified rule from the selected chain. There are two ways to
+use this command. The first is by specifying an interval of rule numbers
+to delete, syntax: start_nr[:end_nr]. Using negative numbers is allowed, for more
+details about using negative numbers, see the -I command. The second usage is by
+specifying the complete rule as it would have been specified when it was added.
+.TP
+.B "-I, --insert"
+Insert the specified rule into the selected chain at the specified rule number.
+If the current number of rules equals N, then the specified number can be
+between -N and N+1. For a positive number i, it holds that i and i-N-1 specify the
+same place in the chain where the rule should be inserted. The number 0 specifies
+the place past the last rule in the chain and using this number is therefore
+equivalent with using the -A command.
+.TP
+.B "-R, --replace"
+Replaces the specified rule into the selected chain at the specified rule number.
+If the current number of rules equals N, then the specified number can be
+between 1 and N. i specifies the place in the chain where the rule should be replaced.
+.TP
+.B "-P, --policy"
+Set the policy for the chain to the given target. The policy can be
+.BR ACCEPT ", " DROP " or " RETURN .
+.TP
+.B "-F, --flush"
+Flush the selected chain. If no chain is selected, then every chain will be
+flushed. Flushing the chain does not change the policy of the
+chain, however.
+.TP
+.B "-Z, --zero"
+Set the counters of the selected chain to zero. If no chain is selected, all the counters
+are set to zero. The
+.B "-Z"
+command can be used in conjunction with the
+.B "-L"
+command.
+When both the
+.B "-Z"
+and
+.B "-L"
+commands are used together in this way, the rule counters are printed on the screen
+before they are set to zero.
+.TP
+.B "-L, --list"
+List all rules in the selected chain. If no chain is selected, all chains
+are listed.
+.TP
+.B "-N, --new-chain"
+Create a new user-defined chain with the given name. The number of
+user-defined chains is unlimited. A user-defined chain name has maximum
+length of 31 characters.
+.TP
+.B "-X, --delete-chain"
+Delete the specified user-defined chain. There must be no remaining references
+to the specified chain, otherwise
+.B arptables
+will refuse to delete it. If no chain is specified, all user-defined
+chains that aren't referenced will be removed.
+.TP
+.B "-E, --rename-chain"
+Rename the specified chain to a new name. Besides renaming a user-defined
+chain, you may rename a standard chain name to a name that suits your
+taste. For example, if you like PREBRIDGING more than PREROUTING,
+then you can use the -E command to rename the PREROUTING chain. If you do
+rename one of the standard
+.B arptables
+chain names, please be sure to mention
+this fact should you post a question on the
+.B arptables
+mailing lists.
+It would be wise to use the standard name in your post. Renaming a standard
+.B arptables
+chain in this fashion has no effect on the structure or function
+of the
+.B arptables
+kernel table.
+
+.SS MISCELLANOUS COMMANDS
+.TP
+.B "-V, --version"
+Show the version of the arptables userspace program.
+.TP
+.B "-h, --help"
+Give a brief description of the command syntax.
+.TP
+.BR "-j, --jump " "\fItarget\fP"
+The target of the rule. This is one of the following values:
+.BR ACCEPT ,
+.BR DROP ,
+.BR CONTINUE ,
+.BR RETURN ,
+a target extension (see
+.BR "TARGET EXTENSIONS" ")"
+or a user-defined chain name.
+.TP
+.BI "-c, --set-counters " "PKTS BYTES"
+This enables the administrator to initialize the packet and byte
+counters of a rule (during
+.B INSERT,
+.B APPEND,
+.B REPLACE
+operations).
+
+.SS RULE-SPECIFICATIONS
+The following command line arguments make up a rule specification (as used
+in the add and delete commands). A "!" option before the specification
+inverts the test for that specification. Apart from these standard rule
+specifications there are some other command line arguments of interest.
+.TP
+.BR "-s, --source-ip " "[!] \fIaddress\fP[/\fImask]\fP"
+The Source IP specification.
+.TP
+.BR "-d, --destination-ip " "[!] \fIaddress\fP[/\fImask]\fP"
+The Destination IP specification.
+.TP
+.BR "--source-mac " "[!] \fIaddress\fP[/\fImask\fP]"
+The source mac address. Both mask and address are written as 6 hexadecimal
+numbers separated by colons.
+.TP
+.BR "--destination-mac " "[!] \fIaddress\fP[/\fImask\fP]"
+The destination mac address. Both mask and address are written as 6 hexadecimal
+numbers separated by colons.
+.TP
+.BR "-i, --in-interface " "[!] \fIname\fP"
+The interface via which a frame is received (for the
+.BR INPUT " and " FORWARD
+chains). The flag
+.B --in-if
+is an alias for this option.
+.TP
+.BR "-o, --out-interface " "[!] \fIname\fP"
+The interface via which a frame is going to be sent (for the
+.BR OUTPUT " and " FORWARD
+chains). The flag
+.B --out-if
+is an alias for this option.
+.TP
+.BR "-l, --h-length " "\fIlength\fP[/\fImask\fP]"
+The hardware length (nr of bytes)
+.TP
+.BR "--opcode " "\fIcode\fP[/\fImask\fP]
+The operation code (2 bytes). Available values are:
+.BR 1 = Request
+.BR 2 = Reply
+.BR 3 = Request_Reverse
+.BR 4 = Reply_Reverse
+.BR 5 = DRARP_Request
+.BR 6 = DRARP_Reply
+.BR 7 = DRARP_Error
+.BR 8 = InARP_Request
+.BR 9 = ARP_NAK .
+.TP
+.BR "--h-type " "\fItype\fP[/\fImask\fP]"
+The hardware type (2 bytes, hexadecimal). Available values are:
+.BR 1 = Ethernet .
+.TP
+.BR "--proto-type " "\fItype\fP[/\fImask\fP]"
+The protocol type (2 bytes). Available values are:
+.BR 0x800 = IPv4 .
+
+.SS TARGET-EXTENSIONS
+.B arptables
+extensions are precompiled into the userspace tool. So there is no need
+to explicitly load them with a -m option like in
+.BR iptables .
+However, these
+extensions deal with functionality supported by supplemental kernel modules.
+.SS mangle
+.TP
+.BR "--mangle-ip-s IP address"
+Mangles Source IP Address to given value.
+.TP
+.BR "--mangle-ip-d IP address"
+Mangles Destination IP Address to given value.
+.TP
+.BR "--mangle-mac-s MAC address"
+Mangles Source MAC Address to given value.
+.TP
+.BR "--mangle-mac-d MAC address"
+Mangles Destination MAC Address to given value.
+.TP
+.BR "--mangle-target target "
+Target of ARP mangle operation
+.BR "" ( DROP ", " CONTINUE " or " ACCEPT " -- default is " ACCEPT ).
+.SS CLASSIFY
+This module allows you to set the skb->priority value (and thus clas-
+sify the packet into a specific CBQ class).
+
+.TP
+.BR "--set-class major:minor"
+
+Set the major and minor class value. The values are always
+interpreted as hexadecimal even if no 0x prefix is given.
+
+.SS MARK
+This module allows you to set the skb->mark value (and thus classify
+the packet by the mark in u32)
+
+.TP
+.BR "--set-mark mark"
+Set the mark value. The values are always
+interpreted as hexadecimal even if no 0x prefix is given
+
+.TP
+.BR "--and-mark mark"
+Binary AND the mark with bits.
+
+.TP
+.BR "--or-mark mark"
+Binary OR the mark with bits.
+
+.SH MAILINGLISTS
+.BR "" "See " http://netfilter.org/mailinglists.html
+.SH SEE ALSO
+.BR iptables "(8), " ebtables "(8), " arp "(8), " rarp "(8), " ifconfig "(8), " route (8)
+.PP
+.BR "" "See " http://ebtables.sf.net
--
2.21.0
