On Sun, Aug 22, 2010 at 09:44:57PM +0900, Simon Horman wrote: > This patch series adds load-balancing of UDP SIP based on Call-ID to > IPVS as well as a frame-work for extending IPVS to handle alternate > persistence requirements. > > REVISIONS > > This is "patch v1" of this series, which addresses a few minor problems, as > annotated on a per-patch basis, since the initial "rfc" posting. Internally > there were 4 rfc versions, 0.1, 0.2, 0.3 and 0.4, some of the notes for > some of the patches reflect those versions. > > OVERVIEW > > The approach that I have taken is what I call persistence engines. > The basic idea being that you can provide a module to LVS that alters > the way that it handles connection templates, which are at the core > of persistence. In particular, an additional key can be added, and > any of the normal IP address, port and protocol information can either > be used or ignored. > > In the case of the SIP persistence engine, the only persistence engine, all > the keys used by the default persistence behaviour are used and the callid > is added as an extra key. I originally intended to ignore the cip, but this > can optionally be done by setting the persistence mask (-M) to 0.0.0.0 > while allowing the flexibility of other mask values. > > It is envisaged that the SIP persistence engine will be used in conjunction > with one-packet scheduling. I'm interested to hear if that doesn't fit your > needs. > > > CONFIGURATION > > A persistence engine is associated with a virtual service > (as are schedulers). I have added the --pe option to the > ivpsadm -A and -E commands to allow the persistence engine > of a virtual service to be added, changed, or deleted. > > e.g. ipvsadm -A -u 10.4.3.192:5060 -p 60 -M 0.0.0.0 -o --pe sip > > There are no other configuration parameters at this time. > > > RUNNING > > When a connection template is created, if its virtual service > has a persistence engine, then the persistence engine can add > an extra key to the connection template. For the SIP module this > is the callid. More generically, it is known as "pe data". And > both the name of the persistence engine, "pe name", and "pe data" > can be viewed in /proc/net/ip_vs_conn and by passing the > --persistent-conn option to ipvsadm -Lc. > > e.g. > # ipvsadm -Lcn --persistent-conn > UDP 00:38 UDP 10.4.3.0:0 10.4.3.192:5060 127.0.0.1:5060 sip 193373839 > > Here we see a single persistence template (cport is 0), which has been > handled by the sip persistence engine. The pe data (callid) is 193373839. > > In the case where the persistence engine can't match a packet for some > reason, the connection will fall back to the normal persistence handling. > This seems reasonable, as that if the packet ought to be dropped, iptables > could be used. > > A limited amount of debugging information has been added which > can be enabled using a value of 9 or greater in > /proc/sys/net/ipv4/vs/debug_level > > CODE AVAILABILITY > > The kernel patches (13) are available in git as the pe-0.4 branch of > git://git.kernel.org/pub/scm/linux/kernel/git/horms/lvs-test-2.6.git > > The ipvsadm patches (2) are available in git as the pe-0.4 branch of > git://github.com/horms/ipvsadm-test.git pe-0.4 should read pe-1 above (x2). pe-0.4 is an older revision. > I will post the ipvsadm patches separately -- To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
