Signed-off-by: Jan Engelhardt <jengelh@xxxxxxxxxx> --- net/ipv4/netfilter/Kconfig | 78 +++++++++++++++++----------------- net/ipv6/netfilter/Kconfig | 44 ++++++++++---------- net/netfilter/Kconfig | 100 ++++++++++++++++++++++---------------------- 3 files changed, 111 insertions(+), 111 deletions(-) diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 4e842d5..a8de392 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -57,15 +57,16 @@ config IP_NF_IPTABLES To compile it as a module, choose M here. If unsure, say N. # The matches. -config IP_NF_MATCH_ECN - tristate '"ecn" match support' +config IP_NF_MATCH_ADDRTYPE + tristate '"addrtype" address type match support' depends on IP_NF_IPTABLES depends on NETFILTER_ADVANCED help - This option adds a `ECN' match, which allows you to match against - the IPv4 and TCP header ECN fields. + This option allows you to match what routing thinks of an address, + eg. UNICAST, LOCAL, BROADCAST, ... - To compile it as a module, choose M here. If unsure, say N. + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. config IP_NF_MATCH_AH tristate '"ah" match support' @@ -77,26 +78,25 @@ config IP_NF_MATCH_AH To compile it as a module, choose M here. If unsure, say N. -config IP_NF_MATCH_TTL - tristate '"ttl" match support' +config IP_NF_MATCH_ECN + tristate '"ecn" match support' depends on IP_NF_IPTABLES depends on NETFILTER_ADVANCED help - This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user - to match packets by their TTL value. + This option adds a `ECN' match, which allows you to match against + the IPv4 and TCP header ECN fields. To compile it as a module, choose M here. If unsure, say N. -config IP_NF_MATCH_ADDRTYPE - tristate '"addrtype" address type match support' +config IP_NF_MATCH_TTL + tristate '"ttl" match support' depends on IP_NF_IPTABLES depends on NETFILTER_ADVANCED help - This option allows you to match what routing thinks of an address, - eg. UNICAST, LOCAL, BROADCAST, ... + This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user + to match packets by their TTL value. - If you want to compile it as a module, say M here and read - <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. + To compile it as a module, choose M here. If unsure, say N. # `filter', generic and specific targets config IP_NF_FILTER @@ -181,26 +181,26 @@ config IP_NF_TARGET_MASQUERADE To compile it as a module, choose M here. If unsure, say N. -config IP_NF_TARGET_REDIRECT - tristate "REDIRECT target support" +config IP_NF_TARGET_NETMAP + tristate "NETMAP target support" depends on NF_NAT depends on NETFILTER_ADVANCED help - REDIRECT is a special case of NAT: all incoming connections are - mapped onto the incoming interface's address, causing the packets to - come to the local machine instead of passing through. This is - useful for transparent proxies. + NETMAP is an implementation of static 1:1 NAT mapping of network + addresses. It maps the network address part, while keeping the host + address part intact. To compile it as a module, choose M here. If unsure, say N. -config IP_NF_TARGET_NETMAP - tristate "NETMAP target support" +config IP_NF_TARGET_REDIRECT + tristate "REDIRECT target support" depends on NF_NAT depends on NETFILTER_ADVANCED help - NETMAP is an implementation of static 1:1 NAT mapping of network - addresses. It maps the network address part, while keeping the host - address part intact. + REDIRECT is a special case of NAT: all incoming connections are + mapped onto the incoming interface's address, causing the packets to + come to the local machine instead of passing through. This is + useful for transparent proxies. To compile it as a module, choose M here. If unsure, say N. @@ -295,6 +295,19 @@ config IP_NF_MANGLE To compile it as a module, choose M here. If unsure, say N. +config IP_NF_TARGET_CLUSTERIP + tristate "CLUSTERIP target support (EXPERIMENTAL)" + depends on IP_NF_MANGLE && EXPERIMENTAL + depends on NF_CONNTRACK_IPV4 + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_MARK + help + The CLUSTERIP target allows you to build load-balancing clusters of + network servers without having a dedicated load-balancing + router/server/switch. + + To compile it as a module, choose M here. If unsure, say N. + config IP_NF_TARGET_ECN tristate "ECN target support" depends on IP_NF_MANGLE @@ -325,19 +338,6 @@ config IP_NF_TARGET_TTL To compile it as a module, choose M here. If unsure, say N. -config IP_NF_TARGET_CLUSTERIP - tristate "CLUSTERIP target support (EXPERIMENTAL)" - depends on IP_NF_MANGLE && EXPERIMENTAL - depends on NF_CONNTRACK_IPV4 - depends on NETFILTER_ADVANCED - select NF_CONNTRACK_MARK - help - The CLUSTERIP target allows you to build load-balancing clusters of - network servers without having a dedicated load-balancing - router/server/switch. - - To compile it as a module, choose M here. If unsure, say N. - # raw + specific targets config IP_NF_RAW tristate 'raw table support (required for NOTRACK/TRACE)' diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index fee881b..91ffba0 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -56,23 +56,23 @@ config IP6_NF_IPTABLES To compile it as a module, choose M here. If unsure, say N. # The simple matches. -config IP6_NF_MATCH_RT - tristate '"rt" Routing header match support' +config IP6_NF_MATCH_AH + tristate '"ah" match support' depends on IP6_NF_IPTABLES depends on NETFILTER_ADVANCED help - rt matching allows you to match packets based on the routing - header of the packet. + This module allows one to match AH packets. To compile it as a module, choose M here. If unsure, say N. -config IP6_NF_MATCH_OPTS - tristate '"hbh" hop-by-hop and "dst" opts header match support' +config IP6_NF_MATCH_EUI64 + tristate '"eui64" address check' depends on IP6_NF_IPTABLES depends on NETFILTER_ADVANCED help - This allows one to match packets based on the hop-by-hop - and destination options headers of a packet. + This module performs checking on the IPv6 source address + Compares the last 64 bits with the EUI64 (delivered + from the MAC address) address To compile it as a module, choose M here. If unsure, say N. @@ -86,6 +86,16 @@ config IP6_NF_MATCH_FRAG To compile it as a module, choose M here. If unsure, say N. +config IP6_NF_MATCH_OPTS + tristate '"hbh" hop-by-hop and "dst" opts header match support' + depends on IP6_NF_IPTABLES + depends on NETFILTER_ADVANCED + help + This allows one to match packets based on the hop-by-hop + and destination options headers of a packet. + + To compile it as a module, choose M here. If unsure, say N. + config IP6_NF_MATCH_HL tristate '"hl" match support' depends on IP6_NF_IPTABLES @@ -106,15 +116,6 @@ config IP6_NF_MATCH_IPV6HEADER To compile it as a module, choose M here. If unsure, say N. -config IP6_NF_MATCH_AH - tristate '"ah" match support' - depends on IP6_NF_IPTABLES - depends on NETFILTER_ADVANCED - help - This module allows one to match AH packets. - - To compile it as a module, choose M here. If unsure, say N. - config IP6_NF_MATCH_MH tristate '"mh" match support' depends on IP6_NF_IPTABLES @@ -124,14 +125,13 @@ config IP6_NF_MATCH_MH To compile it as a module, choose M here. If unsure, say N. -config IP6_NF_MATCH_EUI64 - tristate '"eui64" address check' +config IP6_NF_MATCH_RT + tristate '"rt" Routing header match support' depends on IP6_NF_IPTABLES depends on NETFILTER_ADVANCED help - This module performs checking on the IPv6 source address - Compares the last 64 bits with the EUI64 (delivered - from the MAC address) address + rt matching allows you to match packets based on the routing + header of the packet. To compile it as a module, choose M here. If unsure, say N. diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 4a46485..a6e12be 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -325,6 +325,18 @@ config NETFILTER_XT_TARGET_CONNMARK <file:Documentation/kbuild/modules.txt>. The module will be called ipt_CONNMARK.ko. If unsure, say `N'. +config NETFILTER_XT_TARGET_CONNSECMARK + tristate '"CONNSECMARK" target support' + depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK + default m if NETFILTER_ADVANCED=n + help + The CONNSECMARK target copies security markings from packets + to connections, and restores security markings from connections + to packets (if the packets are not already marked). This would + normally be used in conjunction with the SECMARK target. + + To compile it as a module, choose M here. If unsure, say N. + config NETFILTER_XT_TARGET_DSCP tristate '"DSCP" and "TOS" target support' depends on NETFILTER_XTABLES @@ -356,18 +368,6 @@ config NETFILTER_XT_TARGET_MARK To compile it as a module, choose M here. If unsure, say N. -config NETFILTER_XT_TARGET_NFQUEUE - tristate '"NFQUEUE" target Support' - depends on NETFILTER_XTABLES - depends on NETFILTER_ADVANCED - help - This target replaced the old obsolete QUEUE target. - - As opposed to QUEUE, it supports 65535 different queues, - not just one. - - To compile it as a module, choose M here. If unsure, say N. - config NETFILTER_XT_TARGET_NFLOG tristate '"NFLOG" target support' depends on NETFILTER_XTABLES @@ -380,6 +380,18 @@ config NETFILTER_XT_TARGET_NFLOG To compile it as a module, choose M here. If unsure, say N. +config NETFILTER_XT_TARGET_NFQUEUE + tristate '"NFQUEUE" target Support' + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + help + This target replaced the old obsolete QUEUE target. + + As opposed to QUEUE, it supports 65535 different queues, + not just one. + + To compile it as a module, choose M here. If unsure, say N. + config NETFILTER_XT_TARGET_NOTRACK tristate '"NOTRACK" target support' depends on NETFILTER_XTABLES @@ -429,18 +441,6 @@ config NETFILTER_XT_TARGET_SECMARK To compile it as a module, choose M here. If unsure, say N. -config NETFILTER_XT_TARGET_CONNSECMARK - tristate '"CONNSECMARK" target support' - depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK - default m if NETFILTER_ADVANCED=n - help - The CONNSECMARK target copies security markings from packets - to connections, and restores security markings from connections - to packets (if the packets are not already marked). This would - normally be used in conjunction with the SECMARK target. - - To compile it as a module, choose M here. If unsure, say N. - config NETFILTER_XT_TARGET_TCPMSS tristate '"TCPMSS" target support' depends on NETFILTER_XTABLES && (IPV6 || IPV6=n) @@ -577,6 +577,21 @@ config NETFILTER_XT_MATCH_ESP To compile it as a module, choose M here. If unsure, say N. +config NETFILTER_XT_MATCH_HASHLIMIT + tristate '"hashlimit" match support' + depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) + depends on NETFILTER_ADVANCED + help + This option adds a `hashlimit' match. + + As opposed to `limit', this match dynamically creates a hash table + of limit buckets, based on your selection of source/destination + addresses and/or ports. + + It enables you to express policies like `10kpps for any given + destination address' or `500pps from any given source address' + with a single rule. + config NETFILTER_XT_MATCH_HELPER tristate '"helper" match support' depends on NETFILTER_XTABLES @@ -641,6 +656,17 @@ config NETFILTER_XT_MATCH_MARK To compile it as a module, choose M here. If unsure, say N. +config NETFILTER_XT_MATCH_MULTIPORT + tristate '"multiport" Multiple port match support' + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + help + Multiport matching allows you to match TCP or UDP packets based on + a series of source or destination ports: normally a rule can only + match a single range of ports. + + To compile it as a module, choose M here. If unsure, say N. + config NETFILTER_XT_MATCH_OWNER tristate '"owner" match support' depends on NETFILTER_XTABLES @@ -661,17 +687,6 @@ config NETFILTER_XT_MATCH_POLICY To compile it as a module, choose M here. If unsure, say N. -config NETFILTER_XT_MATCH_MULTIPORT - tristate '"multiport" Multiple port match support' - depends on NETFILTER_XTABLES - depends on NETFILTER_ADVANCED - help - Multiport matching allows you to match TCP or UDP packets based on - a series of source or destination ports: normally a rule can only - match a single range of ports. - - To compile it as a module, choose M here. If unsure, say N. - config NETFILTER_XT_MATCH_PHYSDEV tristate '"physdev" match support' depends on NETFILTER_XTABLES && BRIDGE && BRIDGE_NETFILTER @@ -839,20 +854,5 @@ config NETFILTER_XT_MATCH_U32 Details and examples are in the kernel module source. -config NETFILTER_XT_MATCH_HASHLIMIT - tristate '"hashlimit" match support' - depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n) - depends on NETFILTER_ADVANCED - help - This option adds a `hashlimit' match. - - As opposed to `limit', this match dynamically creates a hash table - of limit buckets, based on your selection of source/destination - addresses and/or ports. - - It enables you to express policies like `10kpps for any given - destination address' or `500pps from any given source address' - with a single rule. - endmenu -- 1.6.0.1 -- To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
