Signed-off-by: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx> --- net/bridge/netfilter/Kconfig | 29 +++++------------------------ 1 files changed, 5 insertions(+), 24 deletions(-) diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index 117c1be..3c7fd31 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -2,22 +2,21 @@ # Bridge netfilter configuration # -menu "Bridge: Netfilter Configuration" - depends on BRIDGE && BRIDGE_NETFILTER - -config BRIDGE_NF_EBTABLES +menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" select NETFILTER_XTABLES help ebtables is a general, extensible frame/packet identification framework. Say 'Y' or 'M' here if you want to do Ethernet filtering/NAT/brouting on the Ethernet bridge. + +if BRIDGE_NF_EBTABLES + # # tables # config BRIDGE_EBT_BROUTE tristate "ebt: broute table support" - depends on BRIDGE_NF_EBTABLES help The ebtables broute table is used to define rules that decide between bridging and routing frames, giving Linux the functionality of a @@ -28,7 +27,6 @@ config BRIDGE_EBT_BROUTE config BRIDGE_EBT_T_FILTER tristate "ebt: filter table support" - depends on BRIDGE_NF_EBTABLES help The ebtables filter table is used to define frame filtering rules at local input, forwarding and local output. See the man page for @@ -38,7 +36,6 @@ config BRIDGE_EBT_T_FILTER config BRIDGE_EBT_T_NAT tristate "ebt: nat table support" - depends on BRIDGE_NF_EBTABLES help The ebtables nat table is used to define rules that alter the MAC source address (MAC SNAT) or the MAC destination address (MAC DNAT). @@ -53,7 +50,6 @@ if NETFILTER_XTABLES # config BRIDGE_EBT_802_3 tristate "ebt: 802.3 filter support" - depends on BRIDGE_NF_EBTABLES help This option adds matching support for 802.3 Ethernet frames. @@ -61,7 +57,6 @@ config BRIDGE_EBT_802_3 config BRIDGE_EBT_AMONG tristate "ebt: among filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the among match, which allows matching the MAC source and/or destination address on a list of addresses. Optionally, @@ -71,7 +66,6 @@ config BRIDGE_EBT_AMONG config BRIDGE_EBT_ARP tristate "ebt: ARP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the ARP match, which allows ARP and RARP header field filtering. @@ -80,7 +74,6 @@ config BRIDGE_EBT_ARP config BRIDGE_EBT_IP tristate "ebt: IP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the IP match, which allows basic IP header field filtering. @@ -89,7 +82,6 @@ config BRIDGE_EBT_IP config BRIDGE_EBT_LIMIT tristate "ebt: limit match support" - depends on BRIDGE_NF_EBTABLES help This option adds the limit match, which allows you to control the rate at which a rule can be matched. This match is the @@ -100,7 +92,6 @@ config BRIDGE_EBT_LIMIT config BRIDGE_EBT_MARK tristate "ebt: mark filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the mark match, which allows matching frames based on the 'nfmark' value in the frame. This can be set by the mark target. @@ -111,7 +102,6 @@ config BRIDGE_EBT_MARK config BRIDGE_EBT_PKTTYPE tristate "ebt: packet type filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the packet type match, which allows matching on the type of packet based on its Ethernet "class" (as determined by @@ -122,7 +112,6 @@ config BRIDGE_EBT_PKTTYPE config BRIDGE_EBT_STP tristate "ebt: STP filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the Spanning Tree Protocol match, which allows STP header field filtering. @@ -131,7 +120,6 @@ config BRIDGE_EBT_STP config BRIDGE_EBT_VLAN tristate "ebt: 802.1Q VLAN filter support" - depends on BRIDGE_NF_EBTABLES help This option adds the 802.1Q vlan match, which allows the filtering of 802.1Q vlan fields. @@ -142,7 +130,6 @@ config BRIDGE_EBT_VLAN # config BRIDGE_EBT_DNAT tristate "ebt: dnat target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC DNAT target, which allows altering the MAC destination address of frames. @@ -151,7 +138,6 @@ config BRIDGE_EBT_DNAT config BRIDGE_EBT_MARK_T tristate "ebt: mark target support" - depends on BRIDGE_NF_EBTABLES help This option adds the mark target, which allows marking frames by setting the 'nfmark' value in the frame. @@ -162,7 +148,6 @@ config BRIDGE_EBT_MARK_T config BRIDGE_EBT_REDIRECT tristate "ebt: redirect target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC redirect target, which allows altering the MAC destination address of a frame to that of the device it arrived on. @@ -171,7 +156,6 @@ config BRIDGE_EBT_REDIRECT config BRIDGE_EBT_SNAT tristate "ebt: snat target support" - depends on BRIDGE_NF_EBTABLES help This option adds the MAC SNAT target, which allows altering the MAC source address of frames. @@ -182,7 +166,6 @@ config BRIDGE_EBT_SNAT # config BRIDGE_EBT_LOG tristate "ebt: log support" - depends on BRIDGE_NF_EBTABLES help This option adds the log watcher, that you can use in any rule in any ebtables table. It records info about the frame header @@ -192,7 +175,6 @@ config BRIDGE_EBT_LOG config BRIDGE_EBT_ULOG tristate "ebt: ulog support (OBSOLETE)" - depends on BRIDGE_NF_EBTABLES help This option enables the old bridge-specific "ebt_ulog" implementation which has been obsoleted by the new "nfnetlink_log" code (see @@ -209,7 +191,6 @@ config BRIDGE_EBT_ULOG config BRIDGE_EBT_NFLOG tristate "ebt: nflog support" - depends on BRIDGE_NF_EBTABLES help This option enables the nflog watcher, which allows to LOG messages through the netfilter logging API, which can use @@ -223,4 +204,4 @@ config BRIDGE_EBT_NFLOG endif # NETFILTER_XTABLES -endmenu +endif # BRIDGE_NF_EBTABLES -- 1.5.5 -- To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
