Move libipt_recent to libxt_recent
Signed-off-by: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
---
extensions/libipt_recent.c | 231 ------------------------------
extensions/libipt_recent.man | 93 ------------
extensions/libxt_recent.c | 217 ++++++++++++++++++++++++++++
extensions/libxt_recent.man | 93 ++++++++++++
include/linux/netfilter/xt_recent.h | 26 +++
include/linux/netfilter_ipv4/ipt_recent.h | 27 ---
6 files changed, 336 insertions(+), 351 deletions(-)
Index: iptables/extensions/libipt_recent.c
===================================================================
--- iptables.orig/extensions/libipt_recent.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/* Shared library add-on to iptables to add recent matching support. */
-#include <stdio.h>
-#include <netdb.h>
-#include <string.h>
-#include <stdlib.h>
-#include <getopt.h>
-
-#include <iptables.h>
-#include <linux/netfilter_ipv4/ipt_recent.h>
-
-/* Need these in order to not fail when compiling against an older kernel. */
-#ifndef RECENT_NAME
-#define RECENT_NAME "ipt_recent"
-#endif /* RECENT_NAME */
-
-#ifndef RECENT_VER
-#define RECENT_VER "unknown"
-#endif /* RECENT_VER */
-
-#ifndef IPT_RECENT_NAME_LEN
-#define IPT_RECENT_NAME_LEN 200
-#endif /* IPT_RECENT_NAME_LEN */
-
-/* Options for this module */
-static const struct option recent_opts[] = {
- { .name = "set", .has_arg = 0, .val = 201 },
- { .name = "rcheck", .has_arg = 0, .val = 202 },
- { .name = "update", .has_arg = 0, .val = 203 },
- { .name = "seconds", .has_arg = 1, .val = 204 },
- { .name = "hitcount", .has_arg = 1, .val = 205 },
- { .name = "remove", .has_arg = 0, .val = 206 },
- { .name = "rttl", .has_arg = 0, .val = 207 },
- { .name = "name", .has_arg = 1, .val = 208 },
- { .name = "rsource", .has_arg = 0, .val = 209 },
- { .name = "rdest", .has_arg = 0, .val = 210 },
- {},
-};
-
-/* Function which prints out usage message. */
-static void recent_help(void)
-{
- printf(
-"recent v%s options:\n"
-"[!] --set Add source address to list, always matches.\n"
-"[!] --rcheck Match if source address in list.\n"
-"[!] --update Match if source address in list, also update last-seen time.\n"
-"[!] --remove Match if source address in list, also removes that address from list.\n"
-" --seconds seconds For check and update commands above.\n"
-" Specifies that the match will only occur if source address last seen within\n"
-" the last 'seconds' seconds.\n"
-" --hitcount hits For check and update commands above.\n"
-" Specifies that the match will only occur if source address seen hits times.\n"
-" May be used in conjunction with the seconds option.\n"
-" --rttl For check and update commands above.\n"
-" Specifies that the match will only occur if the source address and the TTL\n"
-" match between this packet and the one which was set.\n"
-" Useful if you have problems with people spoofing their source address in order\n"
-" to DoS you via this module.\n"
-" --name name Name of the recent list to be used. DEFAULT used if none given.\n"
-" --rsource Match/Save the source address of each packet in the recent list table (default).\n"
-" --rdest Match/Save the destination address of each packet in the recent list table.\n"
-RECENT_NAME " " RECENT_VER ": Stephen Frost <sfrost@xxxxxxxxxxx>. http://snowman.net/projects/ipt_recent/\n";
-,
-IPTABLES_VERSION);
-
-}
-
-/* Initialize the match. */
-static void recent_init(struct xt_entry_match *match)
-{
- struct ipt_recent_info *info = (struct ipt_recent_info *)(match)->data;
-
-
- strncpy(info->name,"DEFAULT",IPT_RECENT_NAME_LEN);
- /* eventhough IPT_RECENT_NAME_LEN is currently defined as 200,
- * better be safe, than sorry */
- info->name[IPT_RECENT_NAME_LEN-1] = '\0';
- info->side = IPT_RECENT_SOURCE;
-}
-
-/* Function which parses command options; returns true if it
- ate an option */
-static int recent_parse(int c, char **argv, int invert, unsigned int *flags,
- const void *entry, struct xt_entry_match **match)
-{
- struct ipt_recent_info *info = (struct ipt_recent_info *)(*match)->data;
- switch (c) {
- case 201:
- if (*flags) exit_error(PARAMETER_PROBLEM,
- "recent: only one of `--set', `--rcheck' "
- "`--update' or `--remove' may be set");
- check_inverse(optarg, &invert, &optind, 0);
- info->check_set |= IPT_RECENT_SET;
- if (invert) info->invert = 1;
- *flags = 1;
- break;
-
- case 202:
- if (*flags) exit_error(PARAMETER_PROBLEM,
- "recent: only one of `--set', `--rcheck' "
- "`--update' or `--remove' may be set");
- check_inverse(optarg, &invert, &optind, 0);
- info->check_set |= IPT_RECENT_CHECK;
- if(invert) info->invert = 1;
- *flags = 1;
- break;
-
- case 203:
- if (*flags) exit_error(PARAMETER_PROBLEM,
- "recent: only one of `--set', `--rcheck' "
- "`--update' or `--remove' may be set");
- check_inverse(optarg, &invert, &optind, 0);
- info->check_set |= IPT_RECENT_UPDATE;
- if (invert) info->invert = 1;
- *flags = 1;
- break;
-
- case 206:
- if (*flags) exit_error(PARAMETER_PROBLEM,
- "recent: only one of `--set', `--rcheck' "
- "`--update' or `--remove' may be set");
- check_inverse(optarg, &invert, &optind, 0);
- info->check_set |= IPT_RECENT_REMOVE;
- if (invert) info->invert = 1;
- *flags = 1;
- break;
-
- case 204:
- info->seconds = atoi(optarg);
- break;
-
- case 205:
- info->hit_count = atoi(optarg);
- break;
-
- case 207:
- info->check_set |= IPT_RECENT_TTL;
- break;
-
- case 208:
- strncpy(info->name,optarg,IPT_RECENT_NAME_LEN);
- info->name[IPT_RECENT_NAME_LEN-1] = '\0';
- break;
-
- case 209:
- info->side = IPT_RECENT_SOURCE;
- break;
-
- case 210:
- info->side = IPT_RECENT_DEST;
- break;
-
- default:
- return 0;
- }
-
- return 1;
-}
-
-/* Final check; must have specified a specific option. */
-static void recent_check(unsigned int flags)
-{
-
- if (!flags)
- exit_error(PARAMETER_PROBLEM,
- "recent: you must specify one of `--set', `--rcheck' "
- "`--update' or `--remove'");
-}
-
-/* Prints out the matchinfo. */
-static void recent_print(const void *ip, const struct xt_entry_match *match,
- int numeric)
-{
- struct ipt_recent_info *info = (struct ipt_recent_info *)match->data;
-
- if (info->invert)
- fputc('!', stdout);
-
- printf("recent: ");
- if(info->check_set & IPT_RECENT_SET) printf("SET ");
- if(info->check_set & IPT_RECENT_CHECK) printf("CHECK ");
- if(info->check_set & IPT_RECENT_UPDATE) printf("UPDATE ");
- if(info->check_set & IPT_RECENT_REMOVE) printf("REMOVE ");
- if(info->seconds) printf("seconds: %d ",info->seconds);
- if(info->hit_count) printf("hit_count: %d ",info->hit_count);
- if(info->check_set & IPT_RECENT_TTL) printf("TTL-Match ");
- if(info->name) printf("name: %s ",info->name);
- if(info->side == IPT_RECENT_SOURCE) printf("side: source ");
- if(info->side == IPT_RECENT_DEST) printf("side: dest");
-}
-
-/* Saves the union ipt_matchinfo in parsable form to stdout. */
-static void recent_save(const void *ip, const struct xt_entry_match *match)
-{
- struct ipt_recent_info *info = (struct ipt_recent_info *)match->data;
-
- if (info->invert)
- printf("! ");
-
- if(info->check_set & IPT_RECENT_SET) printf("--set ");
- if(info->check_set & IPT_RECENT_CHECK) printf("--rcheck ");
- if(info->check_set & IPT_RECENT_UPDATE) printf("--update ");
- if(info->check_set & IPT_RECENT_REMOVE) printf("--remove ");
- if(info->seconds) printf("--seconds %d ",info->seconds);
- if(info->hit_count) printf("--hitcount %d ",info->hit_count);
- if(info->check_set & IPT_RECENT_TTL) printf("--rttl ");
- if(info->name) printf("--name %s ",info->name);
- if(info->side == IPT_RECENT_SOURCE) printf("--rsource ");
- if(info->side == IPT_RECENT_DEST) printf("--rdest ");
-}
-
-/* Structure for iptables to use to communicate with module */
-static struct iptables_match recent_match = {
- .name = "recent",
- .version = IPTABLES_VERSION,
- .size = IPT_ALIGN(sizeof(struct ipt_recent_info)),
- .userspacesize = IPT_ALIGN(sizeof(struct ipt_recent_info)),
- .help = recent_help,
- .init = recent_init,
- .parse = recent_parse,
- .final_check = recent_check,
- .print = recent_print,
- .save = recent_save,
- .extra_opts = recent_opts,
-};
-
-void _init(void);
-void _init(void)
-{
- register_match(&recent_match);
-}
Index: iptables/extensions/libipt_recent.man
===================================================================
--- iptables.orig/extensions/libipt_recent.man
+++ /dev/null
@@ -1,93 +0,0 @@
-Allows you to dynamically create a list of IP addresses and then match
-against that list in a few different ways.
-
-For example, you can create a `badguy' list out of people attempting
-to connect to port 139 on your firewall and then DROP all future
-packets from them without considering them.
-.TP
-.BI "--name " "name"
-Specify the list to use for the commands. If no name is given then 'DEFAULT'
-will be used.
-.TP
-[\fB!\fR] \fB--set\fR
-This will add the source address of the packet to the list. If the
-source address is already in the list, this will update the existing
-entry. This will always return success (or failure if `!' is passed
-in).
-.TP
-[\fB!\fR] \fB--rcheck\fR
-Check if the source address of the packet is currently in
-the list.
-.TP
-[\fB!\fR] \fB--update\fR
-Like \fB--rcheck\fR, except it will update the "last seen" timestamp if it
-matches.
-.TP
-[\fB!\fR] \fB--remove\fR
-Check if the source address of the packet is currently in the list and
-if so that address will be removed from the list and the rule will
-return true. If the address is not found, false is returned.
-.TP
-[\fB!\fR] \fB--seconds \fIseconds\fR
-This option must be used in conjunction with one of \fB--rcheck\fR or
-\fB--update\fR. When used, this will narrow the match to only happen
-when the address is in the list and was seen within the last given
-number of seconds.
-.TP
-[\fB!\fR] \fB--hitcount \fIhits\fR
-This option must be used in conjunction with one of \fB--rcheck\fR or
-\fB--update\fR. When used, this will narrow the match to only happen
-when the address is in the list and packets had been received greater
-than or equal to the given value. This option may be used along with
-\fB--seconds\fR to create an even narrower match requiring a certain
-number of hits within a specific time frame.
-.TP
-\fB--rttl\fR
-This option must be used in conjunction with one of \fB--rcheck\fR or
-\fB--update\fR. When used, this will narrow the match to only happen
-when the address is in the list and the TTL of the current packet
-matches that of the packet which hit the \fB--set\fR rule. This may be
-useful if you have problems with people faking their source address in
-order to DoS you via this module by disallowing others access to your
-site by sending bogus packets to you.
-.P
-Examples:
-.IP
-# iptables -A FORWARD -m recent --name badguy --rcheck --seconds 60 -j DROP
-
-# iptables -A FORWARD -p tcp -i eth0 --dport 139 -m recent --name badguy --set -j DROP
-.P
-Official website (http://snowman.net/projects/ipt_recent/) also has
-some examples of usage.
-
-/proc/net/ipt_recent/* are the current lists of addresses and information
-about each entry of each list.
-
-Each file in /proc/net/ipt_recent/ can be read from to see the current list
-or written two using the following commands to modify the list:
-.TP
-echo xx.xx.xx.xx > /proc/net/ipt_recent/DEFAULT
-to Add to the DEFAULT list
-.TP
-echo -xx.xx.xx.xx > /proc/net/ipt_recent/DEFAULT
-to Remove from the DEFAULT list
-.TP
-echo clear > /proc/net/ipt_recent/DEFAULT
-to empty the DEFAULT list.
-.P
-The module itself accepts parameters, defaults shown:
-.TP
-.BI "ip_list_tot=" "100"
-Number of addresses remembered per table
-.TP
-.BI "ip_pkt_list_tot=" "20"
-Number of packets per address remembered
-.TP
-.BI "ip_list_hash_size=" "0"
-Hash table size. 0 means to calculate it based on ip_list_tot, default: 512
-.TP
-.BI "ip_list_perms=" "0644"
-Permissions for /proc/net/ipt_recent/* files
-.TP
-.BI "debug=" "0"
-Set to 1 to get lots of debugging info
Index: iptables/extensions/libxt_recent.c
===================================================================
--- /dev/null
+++ iptables/extensions/libxt_recent.c
@@ -0,0 +1,217 @@
+/* Shared library add-on to iptables to add recent matching support. */
+#include <stdio.h>
+#include <netdb.h>
+#include <string.h>
+#include <stdlib.h>
+#include <getopt.h>
+
+#include <xtables.h>
+#include <linux/netfilter/xt_recent.h>
+
+/* Options for this module */
+static const struct option recent_opts[] = {
+ { .name = "set", .has_arg = 0, .val = 201 },
+ { .name = "rcheck", .has_arg = 0, .val = 202 },
+ { .name = "update", .has_arg = 0, .val = 203 },
+ { .name = "seconds", .has_arg = 1, .val = 204 },
+ { .name = "hitcount", .has_arg = 1, .val = 205 },
+ { .name = "remove", .has_arg = 0, .val = 206 },
+ { .name = "rttl", .has_arg = 0, .val = 207 },
+ { .name = "name", .has_arg = 1, .val = 208 },
+ { .name = "rsource", .has_arg = 0, .val = 209 },
+ { .name = "rdest", .has_arg = 0, .val = 210 },
+ {},
+};
+
+/* Function which prints out usage message. */
+static void recent_help(void)
+{
+ printf(
+"\"recent\" match options:\n"
+"[!] --set Add source address to list, always matches.\n"
+"[!] --rcheck Match if source address in list.\n"
+"[!] --update Match if source address in list, also update last-seen time.\n"
+"[!] --remove Match if source address in list, also removes that address from list.\n"
+" --seconds seconds For check and update commands above.\n"
+" Specifies that the match will only occur if source address last seen within\n"
+" the last 'seconds' seconds.\n"
+" --hitcount hits For check and update commands above.\n"
+" Specifies that the match will only occur if source address seen hits times.\n"
+" May be used in conjunction with the seconds option.\n"
+" --rttl For check and update commands above.\n"
+" Specifies that the match will only occur if the source address and the TTL\n"
+" match between this packet and the one which was set.\n"
+" Useful if you have problems with people spoofing their source address in order\n"
+" to DoS you via this module.\n"
+" --name name Name of the recent list to be used. DEFAULT used if none given.\n"
+" --rsource Match/Save the source address of each packet in the recent list table (default).\n"
+" --rdest Match/Save the destination address of each packet in the recent list table.\n"
+"ipt_recent by: Stephen Frost <sfrost@xxxxxxxxxxx>. http://snowman.net/projects/ipt_recent/\n";
+);
+}
+
+/* Initialize the match. */
+static void recent_init(struct xt_entry_match *match)
+{
+ struct xt_recent_mtinfo *info = (void *)(match)->data;
+
+ strncpy(info->name,"DEFAULT", XT_RECENT_NAME_LEN);
+ /* even though XT_RECENT_NAME_LEN is currently defined as 200,
+ * better be safe, than sorry */
+ info->name[XT_RECENT_NAME_LEN-1] = '\0';
+ info->side = XT_RECENT_SOURCE;
+}
+
+/* Function which parses command options; returns true if it
+ ate an option */
+static int recent_parse(int c, char **argv, int invert, unsigned int *flags,
+ const void *entry, struct xt_entry_match **match)
+{
+ struct xt_recent_mtinfo *info = (void *)(*match)->data;
+
+ switch (c) {
+ case 201:
+ if (*flags) exit_error(PARAMETER_PROBLEM,
+ "recent: only one of `--set', `--rcheck' "
+ "`--update' or `--remove' may be set");
+ check_inverse(optarg, &invert, &optind, 0);
+ info->check_set |= XT_RECENT_SET;
+ if (invert) info->invert = 1;
+ *flags = 1;
+ break;
+
+ case 202:
+ if (*flags) exit_error(PARAMETER_PROBLEM,
+ "recent: only one of `--set', `--rcheck' "
+ "`--update' or `--remove' may be set");
+ check_inverse(optarg, &invert, &optind, 0);
+ info->check_set |= XT_RECENT_CHECK;
+ if(invert) info->invert = 1;
+ *flags = 1;
+ break;
+
+ case 203:
+ if (*flags) exit_error(PARAMETER_PROBLEM,
+ "recent: only one of `--set', `--rcheck' "
+ "`--update' or `--remove' may be set");
+ check_inverse(optarg, &invert, &optind, 0);
+ info->check_set |= XT_RECENT_UPDATE;
+ if (invert) info->invert = 1;
+ *flags = 1;
+ break;
+
+ case 206:
+ if (*flags) exit_error(PARAMETER_PROBLEM,
+ "recent: only one of `--set', `--rcheck' "
+ "`--update' or `--remove' may be set");
+ check_inverse(optarg, &invert, &optind, 0);
+ info->check_set |= XT_RECENT_REMOVE;
+ if (invert) info->invert = 1;
+ *flags = 1;
+ break;
+
+ case 204:
+ info->seconds = atoi(optarg);
+ break;
+
+ case 205:
+ info->hit_count = atoi(optarg);
+ break;
+
+ case 207:
+ info->check_set |= XT_RECENT_TTL;
+ break;
+
+ case 208:
+ strncpy(info->name,optarg, XT_RECENT_NAME_LEN);
+ info->name[XT_RECENT_NAME_LEN-1] = '\0';
+ break;
+
+ case 209:
+ info->side = XT_RECENT_SOURCE;
+ break;
+
+ case 210:
+ info->side = XT_RECENT_DEST;
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Final check; must have specified a specific option. */
+static void recent_check(unsigned int flags)
+{
+
+ if (!flags)
+ exit_error(PARAMETER_PROBLEM,
+ "recent: you must specify one of `--set', `--rcheck' "
+ "`--update' or `--remove'");
+}
+
+/* Prints out the matchinfo. */
+static void recent_print(const void *ip, const struct xt_entry_match *match,
+ int numeric)
+{
+ const struct xt_recent_mtinfo *info = (const void *)match->data;
+
+ if (info->invert)
+ fputc('!', stdout);
+
+ printf("recent: ");
+ if(info->check_set & XT_RECENT_SET) printf("SET ");
+ if(info->check_set & XT_RECENT_CHECK) printf("CHECK ");
+ if(info->check_set & XT_RECENT_UPDATE) printf("UPDATE ");
+ if(info->check_set & XT_RECENT_REMOVE) printf("REMOVE ");
+ if(info->seconds) printf("seconds: %d ",info->seconds);
+ if(info->hit_count) printf("hit_count: %d ",info->hit_count);
+ if(info->check_set & XT_RECENT_TTL) printf("TTL-Match ");
+ if(info->name) printf("name: %s ",info->name);
+ if(info->side == XT_RECENT_SOURCE) printf("side: source ");
+ if(info->side == XT_RECENT_DEST) printf("side: dest");
+}
+
+/* Saves the union ipt_matchinfo in parsable form to stdout. */
+static void recent_save(const void *ip, const struct xt_entry_match *match)
+{
+ const struct xt_recent_mtinfo *info = (const void *)match->data;
+
+ if (info->invert)
+ printf("! ");
+
+ if(info->check_set & XT_RECENT_SET) printf("--set ");
+ if(info->check_set & XT_RECENT_CHECK) printf("--rcheck ");
+ if(info->check_set & XT_RECENT_UPDATE) printf("--update ");
+ if(info->check_set & XT_RECENT_REMOVE) printf("--remove ");
+ if(info->seconds) printf("--seconds %d ",info->seconds);
+ if(info->hit_count) printf("--hitcount %d ",info->hit_count);
+ if(info->check_set & XT_RECENT_TTL) printf("--rttl ");
+ if(info->name) printf("--name %s ",info->name);
+ if(info->side == XT_RECENT_SOURCE) printf("--rsource ");
+ if(info->side == XT_RECENT_DEST) printf("--rdest ");
+}
+
+/* Structure for iptables to use to communicate with module */
+static struct xtables_match recent_match = {
+ .name = "recent",
+ .version = IPTABLES_VERSION,
+ .family = AF_INET,
+ .size = XT_ALIGN(sizeof(struct xt_recent_mtinfo)),
+ .userspacesize = XT_ALIGN(sizeof(struct xt_recent_mtinfo)),
+ .help = recent_help,
+ .init = recent_init,
+ .parse = recent_parse,
+ .final_check = recent_check,
+ .print = recent_print,
+ .save = recent_save,
+ .extra_opts = recent_opts,
+};
+
+void _init(void);
+void _init(void)
+{
+ xtables_register_match(&recent_match);
+}
Index: iptables/extensions/libxt_recent.man
===================================================================
--- /dev/null
+++ iptables/extensions/libxt_recent.man
@@ -0,0 +1,93 @@
+Allows you to dynamically create a list of IP addresses and then match
+against that list in a few different ways.
+
+For example, you can create a `badguy' list out of people attempting
+to connect to port 139 on your firewall and then DROP all future
+packets from them without considering them.
+.TP
+.BI "--name " "name"
+Specify the list to use for the commands. If no name is given then 'DEFAULT'
+will be used.
+.TP
+[\fB!\fR] \fB--set\fR
+This will add the source address of the packet to the list. If the
+source address is already in the list, this will update the existing
+entry. This will always return success (or failure if `!' is passed
+in).
+.TP
+[\fB!\fR] \fB--rcheck\fR
+Check if the source address of the packet is currently in
+the list.
+.TP
+[\fB!\fR] \fB--update\fR
+Like \fB--rcheck\fR, except it will update the "last seen" timestamp if it
+matches.
+.TP
+[\fB!\fR] \fB--remove\fR
+Check if the source address of the packet is currently in the list and
+if so that address will be removed from the list and the rule will
+return true. If the address is not found, false is returned.
+.TP
+[\fB!\fR] \fB--seconds \fIseconds\fR
+This option must be used in conjunction with one of \fB--rcheck\fR or
+\fB--update\fR. When used, this will narrow the match to only happen
+when the address is in the list and was seen within the last given
+number of seconds.
+.TP
+[\fB!\fR] \fB--hitcount \fIhits\fR
+This option must be used in conjunction with one of \fB--rcheck\fR or
+\fB--update\fR. When used, this will narrow the match to only happen
+when the address is in the list and packets had been received greater
+than or equal to the given value. This option may be used along with
+\fB--seconds\fR to create an even narrower match requiring a certain
+number of hits within a specific time frame.
+.TP
+\fB--rttl\fR
+This option must be used in conjunction with one of \fB--rcheck\fR or
+\fB--update\fR. When used, this will narrow the match to only happen
+when the address is in the list and the TTL of the current packet
+matches that of the packet which hit the \fB--set\fR rule. This may be
+useful if you have problems with people faking their source address in
+order to DoS you via this module by disallowing others access to your
+site by sending bogus packets to you.
+.P
+Examples:
+.IP
+# iptables -A FORWARD -m recent --name badguy --rcheck --seconds 60 -j DROP
+
+# iptables -A FORWARD -p tcp -i eth0 --dport 139 -m recent --name badguy --set -j DROP
+.P
+Official website (http://snowman.net/projects/ipt_recent/) also has
+some examples of usage.
+
+/proc/net/ipt_recent/* are the current lists of addresses and information
+about each entry of each list.
+
+Each file in /proc/net/ipt_recent/ can be read from to see the current list
+or written two using the following commands to modify the list:
+.TP
+echo xx.xx.xx.xx > /proc/net/ipt_recent/DEFAULT
+to Add to the DEFAULT list
+.TP
+echo -xx.xx.xx.xx > /proc/net/ipt_recent/DEFAULT
+to Remove from the DEFAULT list
+.TP
+echo clear > /proc/net/ipt_recent/DEFAULT
+to empty the DEFAULT list.
+.P
+The module itself accepts parameters, defaults shown:
+.TP
+.BI "ip_list_tot=" "100"
+Number of addresses remembered per table
+.TP
+.BI "ip_pkt_list_tot=" "20"
+Number of packets per address remembered
+.TP
+.BI "ip_list_hash_size=" "0"
+Hash table size. 0 means to calculate it based on ip_list_tot, default: 512
+.TP
+.BI "ip_list_perms=" "0644"
+Permissions for /proc/net/ipt_recent/* files
+.TP
+.BI "debug=" "0"
+Set to 1 to get lots of debugging info
Index: iptables/include/linux/netfilter/xt_recent.h
===================================================================
--- /dev/null
+++ iptables/include/linux/netfilter/xt_recent.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_NETFILTER_XT_RECENT_H
+#define _LINUX_NETFILTER_XT_RECENT_H 1
+
+enum {
+ XT_RECENT_CHECK = 1 << 0,
+ XT_RECENT_SET = 1 << 1,
+ XT_RECENT_UPDATE = 1 << 2,
+ XT_RECENT_REMOVE = 1 << 3,
+ XT_RECENT_TTL = 1 << 4,
+
+ XT_RECENT_SOURCE = 0,
+ XT_RECENT_DEST = 1,
+
+ XT_RECENT_NAME_LEN = 200,
+};
+
+struct xt_recent_mtinfo {
+ u_int32_t seconds;
+ u_int32_t hit_count;
+ u_int8_t check_set;
+ u_int8_t invert;
+ char name[XT_RECENT_NAME_LEN];
+ u_int8_t side;
+};
+
+#endif /* _LINUX_NETFILTER_XT_RECENT_H */
Index: iptables/include/linux/netfilter_ipv4/ipt_recent.h
===================================================================
--- iptables.orig/include/linux/netfilter_ipv4/ipt_recent.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _IPT_RECENT_H
-#define _IPT_RECENT_H
-
-#define RECENT_NAME "ipt_recent"
-#define RECENT_VER "v0.3.1"
-
-#define IPT_RECENT_CHECK 1
-#define IPT_RECENT_SET 2
-#define IPT_RECENT_UPDATE 4
-#define IPT_RECENT_REMOVE 8
-#define IPT_RECENT_TTL 16
-
-#define IPT_RECENT_SOURCE 0
-#define IPT_RECENT_DEST 1
-
-#define IPT_RECENT_NAME_LEN 200
-
-struct ipt_recent_info {
- u_int32_t seconds;
- u_int32_t hit_count;
- u_int8_t check_set;
- u_int8_t invert;
- char name[IPT_RECENT_NAME_LEN];
- u_int8_t side;
-};
-
-#endif /*_IPT_RECENT_H*/
-
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
