NASA Selects 12 Companies to Collaborate on Key Technology Development

[NASA News Releases <hqnews@xxxxxxxxxxxxxxxxxxxx>]

	April 25, 2023  RELEASE 23-050 NASA Selects 12 Companies to Collaborate on Key Technology Development aco_release.jpg NASA's Volatiles Investigating Polar Exploration Rover, or VIPER, conducts mobility testing at NASA Glenn’s Simulated Lunar Operation Laboratory (SLOPE). Credit: Bridget Caswell/Alcyon Technical Services, LLC. Credits: NASA NASA has selected 16 proposals from 12 companies under the 2022 Announcement of Collaboration Opportunity (ACO) to advance capabilities and technologies related to NASA's Moon to Mars Objectives. The cadre of U.S. industry-led teams will test a new lunar rover tire design, develop a robotically assembled power system, build an electrically actuated device to join in-space propellant transfer lines, and more. Under unfunded Space Act Agreements, NASA will provide access to its unique facilities and technical expertise, allowing the agency to directly support continued development of promising technologies without the transfer of funds. “By sharing our knowledge and facilities with U.S. companies, NASA helps mature capabilities that promise to benefit our objectives and the entire aerospace industry,” said Jim Reuter, associate administrator for the Space Technology Mission Directorate (STMD) at the agency’s headquarters in Washington. “These awards allow us to work with both small and large companies to advance some of the most crucial technologies for future exploration.” The selected proposals, grouped by company, and the respective partnering NASA centers are: Aerojet Rocketdyne in El Segundo, California (two selections) Fully Additively Manufactured LOX-LH2 Engine Demonstration – NASA Marshall Electrically Actuated Quick-Disconnect Coupling for Cislunar and Lunar Surface Cryogenic Propellant Transfer – NASA Marshall Blue Origin in Kent, Washington (two selections) Friction Stir Additive Manufacturing – NASA Langley and NASA Marshall Metallic Thermal Protection System – NASA Ames and NASA Langley The Boeing Company in Arlington, Virginia Complex Curvature Retractable Pin Tool Friction Stir Welding Pathfinder Campaign – NASA Marshall Canopy Aerospace in Denver Low-Cost Reusable Thermal Protection System Substrates as an Alternative to Alumina Enhanced Thermal Barrier – NASA Ames Lockheed Martin Corporation in Bethesda, Maryland (three selections) Friction Stir Welded Blanks for Advanced Formed Shapes – NASA Langley In-Space Manufacturing Technologies for Thermoplastic Composites – NASA Glenn, NASA Goddard, NASA Langley, and NASA Marshall Oscillating Heat Pipe Technology for Aero Entry and Commercial Applications – NASA Ames and NASA Marshall Maxar in Westminster, Colorado Automated Robotic Assembly of the Light Bender System – NASA Langley Phase Four in El Segundo, California Development of an ASCENT (Advanced Spacecraft Energetic Non-Toxic) Gas Feed System for the Phase Four RF (Radio Frequency) Thruster – NASA Marshall Psionic, LLC in Hampton, Virginia Commercial Wind Measurement Constellation – NASA Langley Roccor, LLC (Redwire) in Erie, Colorado Characterization of High Aspect Ratio Booms for Large Apertures – NASA Langley Sierra Space in Louisville, Colorado Development of Low-Cost High Temperature Reusable Thermal Protection System – NASA Ames and NASA Johnson Stratolaunch in Mojave, California Bringing Shuttle Orbiter TPS into the 21st Century – NASA Ames Venturi Astrolab in Hawthorne, California Demonstrating Lunar Tire Technology Readiness – NASA Glenn and NASA Johnson Since the inaugural ACO in 2015, STMD has supported more than 75 ACO projects, including the new awards. The period of performance will be negotiated for each agreement, with an expected duration of between 12 and 24 months. The total estimated value of agency resources to support the agreements is approximately $14.5 million. The selected proposals will be led by a diverse array of companies including small and large businesses and will develop a broad range of technologies. Venturi Astrolab will work with NASA’s Glenn Research Center in Cleveland and Johnson Space Center in Houston to demonstrate a durable lunar rover tire that can tolerate extremely cold temperatures. The design could allow mission planners to consider more lunar locations for rover exploration and longer traverses. Psionic seeks to expand a well-tested landing technology called Navigation Doppler Lidar to make wind measurements. The small business will work with NASA’s Langley Research Center in Hampton, Virginia, to adapt the technology for new potential applications such as real-time air traffic management using a satellite constellation and providing better data for studying the climates of both Earth and Mars. Lockheed Martin will advance in-space manufacturing technologies for thermoplastic composites. This low-cost material requires less energy to make in-orbit compared to metal. The company will test the technique in simulated space environments with several NASA centers. “The collaborations reduce the development cost of space technologies and aim to accelerate the infusion of new capabilities,” said LK Kubendran, STMD, ACO, and Tipping Point lead. “The 2022 ACO solicitation topics were intentionally broad, allowing industry to propose emerging capabilities with the widest potential benefit, increasing access to space for all.” Organizations interested in developing space technology with NASA can explore opportunities online. For more information about NASA’s space technology investments, visit: www.nasa.gov/spacetech -end-
	Press Contacts Sarah Frazier Headquarters, Washington 202-853-7191 sarah.frazier@xxxxxxxx
	NASA news releases and other information are available automatically by sending an e-mail to hqnews-join@xxxxxxxxxxxxxxxx.gov (no subject or text in the body is required). To unsubscribe from the list, send an e-mail message to hqnews-leave@xxxxxxxxxxxxxxxx.gov (no subject or text in the body is required).