NASA Developing Fission Surface Power Technology

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

 



Sept. 10, 2008

Stephanie Schierholz/Grey Hautaluoma 
Headquarters, Washington 
202-358-4997/0668      
stephanie.schierholz@xxxxxxxx 
grey.hautaluoma-1@xxxxxxxx 

Katherine K. Martin 
Glenn Research Center, Cleveland 
216-433-2406 
katherine.k.martin@xxxxxxxx 

RELEASE: 08-227

NASA DEVELOPING FISSION SURFACE POWER TECHNOLOGY

CLEVELAND -- NASA astronauts will need power sources when they return 
to the moon and establish a lunar outpost. NASA engineers are 
exploring the possibility of nuclear fission to provide the necessary 
power and taking initial steps toward a non-nuclear technology 
demonstration of this type of system. 

A fission surface power system on the moon has the potential to 
generate a steady 40 kilowatts of electric power, enough for about 
eight houses on Earth. It works by splitting uranium atoms in a 
reactor to generate heat that then is converted into electric power. 
The fission surface power system can produce large amounts of power 
in harsh environments, like those on the surface of the moon or Mars, 
because it does not rely on sunlight. The primary components of 
fission surface power systems are a heat source, power conversion, 
heat rejection and power conditioning, and distribution. 

"Our goal is to build a technology demonstration unit with all the 
major components of a fission surface power system and conduct 
non-nuclear, integrated system testing in a ground-based space 
simulation facility," said Lee Mason, principal investigator for the 
test at NASA's Glenn Center in Cleveland. "Our long-term goal is to 
demonstrate technical readiness early in the next decade, when NASA 
is expected to decide on the type of power system to be used on the 
lunar surface." 

Glenn recently contracted for the design and analysis of two different 
types of advanced power conversion units as an early step in the 
development of a full system-level technology demonstration. These 
power conversion units are necessary to process the heat produced by 
the nuclear reactor and efficiently convert it to electrical power. 

The first design concept by Sunpower Inc., of Athens, Ohio, uses two 
opposed piston engines coupled to alternators that produce 6 
kilowatts each, or a total of 12 kilowatts of power. The second 
contract with Barber Nichols Inc. of Arvada, Colo., is for 
development of a closed Brayton cycle engine that uses a high speed 
turbine and compressor coupled to a rotary alternator that also 
generates 12 kilowatts of power. 

"Development and testing of the power conversion unit will be a key 
factor in demonstrating the readiness of fission surface power 
technology and provide NASA with viable and cost-effective options 
for nuclear power on the moon and Mars," said Don Palac, manager of 
Glenn's Fission Surface Power Project. 

After a one year design and analysis phase, a single contractor will 
be selected to build and test a prototype power conversion unit. When 
complete, the power conversion unit will be integrated with the other 
technology demonstration unit's major components. Glenn will develop 
the heat rejection system and provide the space simulation facility. 
Glenn also will work in conjunction with the Department of Energy and 
NASA's Marshall Space Flight Center in Huntsville, Ala. Marshall will 
develop and provide a non-nuclear reactor simulator with liquid metal 
coolant as the heat source unit for the technology demonstration. 

A nuclear reactor used in space is much different than Earth-based 
systems. There are no large concrete cooling towers, and the reactor 
is about the size of an office trash can. The energy produced from a 
space reactor also is much smaller but more than adequate for the 
projected power needs of a lunar outpost. 

Testing of the non-nuclear system is expected to take place at Glenn 
in 2012 or 2013. These tests will help verify system performance 
projections, develop safe and reliable control methods, gain valuable 
operating experience, and reduce technology and programmatic risks. 
This technology demonstration is being conducted as part of NASA's 
Exploration Technology Development Program. 
For an artist's concept of a fission surface power system, visit: 



http://www.nasa.gov/centers/glenn/news/pressrel/2008/08-042addm.html 


For more information about NASA's exploration program, visit: 










http://www.nasa.gov/exploration 

	
-end-



To subscribe to the list, send a message to: 
hqnews-subscribe@xxxxxxxxxxxxxxxxxxxxxx
To remove your address from the list, send a message to:
hqnews-unsubscribe@xxxxxxxxxxxxxxxxxxxxxx
[Index of Archives]     [JPL News]     [Cassini News From Saturn]     [NASA Marshall Space Flight Center News]     [NASA Science News]     [James Web Space Telescope News]     [JPL Home]     [NASA KSC]     [NTSB]     [Deep Creek Hot Springs]     [Yosemite Discussion]     [NSF]     [Telescopes]

  Powered by Linux