Anyone else got any guidance they can lend on this? -- Dominic Driver Engineer Paragon Electronic Design Limited Level 2 21-23 Andrews Avenue ANZ House PO Box 30-449, Lower Hutt New Zealand Direct: +64 4 5703892 Fax: +64 4 5703 871 mailto:dominic.driver at paragon.co.nz http://www.paragon.co.nz ----- Original Message ----- From: "Dominic Driver" <dominic.driver at paragon.co.nz> To: "MPlayer usage questions, feature requests, bug reports" <mplayer-users at mplayerhq.hu> Sent: Tuesday, December 8, 2009 4:01:32 PM (GMT+1200) Auto-Detected Subject: Re: MPlayer Total Length in Slave Mode I'm launching MPlayer with: mplayer -slave -quiet -nocache -input file=ControlFile dvdnav:// -dvd-device <location> where <location> is either /dev/scd0 or the HDD directory containing the authored files. If I use identify, I have to specify the actual file VTS_01_1.VOB instead of the directory. In this case, I get the following: ID_LENGTH=29.91 I don't have a value for ID_DVD_TITLE_1_LENGTH, it doesn't appear in any mplayer output. When I then launch MPlayer using the line above, the responses to the following commands are: get_time_length : ANS_LENGTH=27.08 get_property time_pos : ANS_time_pos=<position in time within the original mpeg file> When playback transitions from the original mpeg 1 to the second mpeg 2, the total time length doesn't change. However, responses to time_pos are relative to the start of the original second mpeg file. i.e. if I were to continually poll using the time_pos command, I'd see values: Original MPEG 1 | Original MPEG 2 Play ... 0.0 ... 10.0 ... 22.7 ... 0.0 .... 1.0 ... 2.0 ... Stop I expected output to be from 0.0 -> <total title length> in an uninterrupted way. Is my assumption correct? What am I missing here? Thanks, Dom ----- Original Message ----- From: "Reimar D?ffinger" <Reimar.Doeffinger at gmx.de> To: "MPlayer usage questions, feature requests, bug reports" <mplayer-users at mplayerhq.hu> Sent: Sunday, December 6, 2009 8:22:42 AM (GMT+1200) Auto-Detected Subject: Re: MPlayer Total Length in Slave Mode On Fri, Dec 04, 2009 at 08:35:38AM +1300, Dominic Driver wrote: > However, I'm also using MPlayer to playback the authored files/Burned DVD using slave mode. How, with which command? > 2) get_time_length - This gets the total title length > > However, the response to 2) above seems to give me the total length of the original mpeg file which is currently playing, even though it's supposedly been amalgamated into the DVD-style movie title. Does the get_time_length result differ from what you get after ID_DVD_TITLE_1_LENGTH= if you start MPlayer with -identify? _______________________________________________ MPlayer-users mailing list MPlayer-users at mplayerhq.hu https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users _______________________________________________ MPlayer-users mailing list MPlayer-users at mplayerhq.hu https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
